DELL POWERVAULT LTO-5-140 STORAGE

Data: novembre 8th, 2013

Per scaricare il driver per DELL POWERVAULT LTO-5-140 STORAGE, compatibile con Windows, Windows XP, Windows 2008 (64), Windows 2008 (32), Windows 2008, Windows 2003 (64), Windows 2003, premete sul pulsante "Download". Se avete bisogno di driver o firmware di un’altra versione, inviate una richiesta. Se avete delle domande su questo driver, contattateci utilizzando il modulo di contatto. Sempre su questa pagina, potrete anche discutere di dettagli riguardanti installazione, rimozione o aggiornamenti per questo driver.

Modello:
PowerVault LTO-5-140 Storage
Fabbricante:
Dell
Tipo de dispositivo:
Networking & server enterprise / PowerVault
Licenza:
Gratis

Windows

Tipo: Firmware
Versione: 636G.GS003,A25
Dimensione: 147.62 Mb
Sistema operativo: Windows XP
ML6000 Firmware Update Release A25
Dell PowerVault ML6000 Firmware Update for Library and Drive; release version A25.FW Revisions: Library FW = 636G.GS003 LT03 drive = 93GPLT04 drive = C7QHLTO5 drive = D2A6LT06 drive = D2D6
Fixes:-Library Firmware: -- Addressed a library inventory issue when using the library manual import --Updated the Open source package for OpenSSL -- Addressed Bug where the pasward field allows more than 16 characters- LT03 Drive: -- Corrected an issue where the drive is no correctly configuring the media MAM, which caused reading errors in an LT05 drive- LT04 Drive: -- Optomized LUN0 timeout delay, the previous delay was too long and caused some hosts to abort the inquire command -- Fix incompatibility issue with Symnatec Software AME configuration, Next block encryption bit status was reported incorrectly by the Drive- LT05 Drive: -- Fix incompatibility issue with Symnatec Software AME configuration, Next block encryption bit status was reported incorrectly by the Drive -- Fix a drive performance issue when reading the EndOfData -- Fix problem when drive reported 2C11 due to uninitilaized media - LT06 Drive: -- Fix incompatibility issue with Symnatec Software AME configuration, Next block encryption bit status was reported incorrectly by the Drive -- Fix drive panic when a media with a corrupt MAM is loaded into the drive-- Fix problem when drive reported 2C11 due to uninitilaized media Enhancements:- Not Applicable
This file contains a compressed (or zipped) set of files. Download the file to a folder on your hard drive, and then run (double-click) it to unzip the set of files. Follow the instructions to complete the installation.
Tipo: Pilote
Versione: A00
Dimensione: 1.01 Mb
Sistema operativo: Windows 2008 (32), Windows 2008 (64), Windows 2008, Windows 2003, Windows 2003 (64)
LTO5 Webpost Driver Package
The Dell PowerVault LTO5-140 Tape Drive will use the native Microsoft LTO driver included in Windows Server 2008R2 and Windows Server 2012. All other Microsoft Operating Systems will be required to install the Microsoft Hotfix for the driver. Please refer to Microsofts KB Article 971650. This
Tipo: Pilote
Versione: A00
Dimensione: 1.02 Mb
Sistema operativo: Windows 2008 (64), Windows 2008 (32), Windows 2008, Windows 2003, Windows 2003 (64)
LTO5 Webpost Driver Package
The Dell PowerVault LTO5-140 Tape Drive will use the native Microsoft LTO driver included in Windows Server 2008R2 and Windows Server 2012. All other Microsoft Operating Systems will be required to install the Microsoft Hotfix for the driver. Please refer to Microsofts KB Article 971650. This
Tipo: Firmware
Versione: 07.03.06.00,A09
Dimensione: 856.27 Kb
Sistema operativo: Windows XP
Dell PERC H200 Modular
- When installing an OS, be sure to select a Boot Device in CTRL C. In CTRL C, under SAS Topology, scroll down to the desired Physical Disk or Virtual Disk and enter ALT B to select the device as your Boot Device. - Resynch, Background Init and Consistency Check processes will always occur serially.- When viewing SATA physical disk properties from Ctrl-C or other management applications, Vendor Identification must be translated as "ATA" followed by blanks. Please see SATA translation specification, revision 5, pages 24-25 for more details. - When adding a PERC H200 controller to a system, either by physically adding an adapter or by enabling the integrated SAS controller in the system BIOS, the new controller may need to be added to the controller boot order in the PERC H200 BIOS configuration Utility.
Fixes an issue where the controller intermittently does not get detected when booting to the OS in UEFI mode.
This file contains a compressed (or zipped) set of files. Download the file to a folder on your hard drive, and then run (double-click) it to unzip the set of files. Follow the instructions to complete the installation.
Tipo: Firmware
Versione: 1.0
Dimensione: 86.49 Mb
Sistema operativo: Windows XP
Seagate ST500DM002/ST320DM002/ST250DM000 Firmware Update
This package provides the Seagate ST500DM002/ST320DM002/ST250DM000 Firmware Update and is supported on Optiplex, XPS Desktop, Alienware Desktop, Inspiron Desktop, Precision and Vostro Desktop models that are running the following Windows Operating Systems: VISTA, Windows7 and Windows 8.
1) Please close other applications before updating. 2) While the firmware is updating, please don't turn off the computer. 3) If the firmware flash utility fails to update, please use the legacy mode instead of the BIOS default SATA configuration.
Fixes: - Not ApplicableEnhancement: - Enhanced Power Up In Standby (PUIS) feature. PUIS is SATA hard disk configuration which prevents the drive from automatic spin-up when power is applied. The spin-up occurs later by ATA command only, when the disc is needed, to conserve electric power. - Enhanced drive stability under extremely heavy workload.
This file contains a compressed (or zipped) set of files. Download the file to a folder on your hard drive, and then run (double-click) it to unzip the set of files. Follow the instructions to complete the installation.
Tipo: Firmware
Versione: A07
Dimensione: 20.08 Mb
Sistema operativo: Windows 2008 (64), Windows 2008 (32), Windows 2008, Windows 2003 (64), Windows 2003
LTO5-140 Webpost Firmware Package D8D5
Firmware upgrade for Dell PowerVault LTO5-140 Tape Drive. This release contains drive firmware and ITDT-DCR. *Note: If the drive has firmware revision D2A1 or D2AD loaded, DUP is not supported and ITDT must be used.
Tipo: Firmware
Versione: D2A1,A06
Dimensione: 86.49 Mb
Sistema operativo: Windows XP
LTO5-140 Webpost Firmware Package D2A1
To install ITDT, a suitable version of Java is required for both Windows and Linux.***** LINUX INSTALLATIONS ONLY *****The default install location for the current release of ITDT has changed in Linux based installations. The previous destination was: /opt/dell/dvtd/jre Whereas the current default location is: /opt/dell/itdt_dcr/jreThe symbolic link creation example for ITDT in Section 2.1 of the readme file should be:IBM JRE: $ ln -sf /opt/IBMJava2-142/jre /opt/dell/itdt_dcr/jre Sun Microsystems JRE: $ ln -sf /usr/java/j2re1.4.2_09 /opt/dell/itdt_dcr/jre
-Sense and reporting changes.-Servo enhancements related to continue 2Exx errors in field.-Standardized drive dump.
This file contains a compressed (or zipped) set of files. Download the file to a folder on your hard drive, and then run (double-click) it to unzip the set of files. Follow the instructions to complete the installation.
Tipo: Firmware
Versione: A10
Dimensione: 9.62 Mb
Sistema operativo: Windows 2008 (32), Windows 2008 (64), Windows 2008, Windows 2003 (64), Windows 2003
6Gbps SAS HBA Firmware Package
6Gbps SAS HBA Firmware Release
Tipo: Firmware
Versione: 07.03.06.00,A10
Dimensione: 856.78 Kb
Sistema operativo: Windows XP
DELL
When installing an OS, be sure to select a Boot Device in CTRL C. In CTRL C, under SAS Topology, scroll down to the desired Physical Disk or Virtual Disk and enter ALT B to select the device as your Boot Device. - Resynch, Background Init and Consistency Check processes will always occur serially.- When viewing SATA physical disk properties from Ctrl-C or other management applications, Vendor Identification must be translated as "ATA" followed by blanks. Please see SATA translation specification, revision 5, pages 24-25 for more details. - When adding a Dell 6Gbps SAS controller to a system, the new controller may need to be added to the controller boot order in the PERC H200 BIOS / 6Gbps SAS configuration Utility.
Fixes an issue where the controller intermittently does not get detected when booting to the OS in UEFI mode.
This file contains a compressed (or zipped) set of files. Download the file to a folder on your hard drive, and then run (double-click) it to unzip the set of files. Follow the instructions to complete the installation.


Più driver

DELL POWERVAULT LTO5-140
Driver per Networking & server enterprise DELL POWERVAULT LTO5-140 (Windows 2012, Windows 2008, Windows 2003)

DELL POWERVAULT MD3200
Driver per Networking & server enterprise DELL POWERVAULT MD3200 (Windows 8.1, Windows 8, Windows 7, Windows 2012, Windows 2008, Linux Red Hat, Linux, VMware)

DELL POWERVAULT DL2200
Driver per Networking & server enterprise DELL POWERVAULT DL2200 (Windows 2008)

DELL POWERVAULT MD3620I
Driver per Networking & server enterprise DELL POWERVAULT MD3620I (Windows 8.1, Windows 8, Windows 7, Windows 2012, Windows 2008, Linux Red Hat, Linux, VMware)

DELL POWERVAULT MD3660I
Driver per Networking & server enterprise DELL POWERVAULT MD3660I (Windows 8.1, Windows 8, Windows 7, Windows 2012, Windows 2008, Linux Red Hat, Linux, VMware)

DELL POWERVAULT MD3600I
Driver per Networking & server enterprise DELL POWERVAULT MD3600I (Windows 8.1, Windows 8, Windows 7, Windows 2012, Windows 2008, Linux Red Hat, Linux, VMware)


Richiedere il driver

ejemplo