TOSHIBA SATELLITE PRO U400-SP2908A

2.1.0.1 for x64

---

1.To install or uninstall this software, logon with Administrator user privilege.
2.How to install new version when an old one has been already installed in your system: 1Uninstall the old version from “Control Panel†and reboot the system. 2)Install the new version.
3.TOSHIBA Disc Creator uses Windows Media Player(WMP) to gather titles for the songs on the music CDs. When WMP is not installed or configured, the function which displays the music name of CD does not work.

This is an update for CyberLink PowerCinema installed on Toshiba Computers.

Change Points

This batch application includes the following improvements from the previous version:

1. If eSATA-HDD is selected after the external eSATA-HDD is connected to the PC and the system is rebooted, an error message is displayed on the screen and the eSTATA-HDD cannot be removed.

Install Instructions

1. Save the file to the Windows Desktop.
2. Save all work in progress and close open applications.
3. On the Windows Desktop, double-click the downloaded file to start the installation.
4. If a User Account Control message is displayed, click Continue.
5. Click Next, Yes, then Finish.

***NOTE*** This software package is part of the pre-installed software for the applicable products.

This driver is needed to insure the proper operation of the sound device in your computer. This driver is required for playback of Wave and MIDI files.

---

Change Points

1. Corrected an issue where the internal microphone volume is to low during an internet phone call or recording.

---

Installation Instructions

1. Save this file to a convenient location such as the Windows Desktop
2. Uninstall the existing Conexant Audio Driver by clicking Start, Control Panel, Uninstall a Program under the Programs heading, Conexant HD Audio, then Uninstall.
3. Restart the computer.
4. On the Windows Desktop, double-click the downloaded file to start the installation.
   1. Click OK, Unzip then OK again.
   2. If a User Account Control message is displayed, click Continue.
   3. A device driver installation wizard window will be displayed.
   4. Click OK at the Device driver installation window to start the installation
   5. A device driver installation wizard window will be displayed.
   6. Click OK at the Device driver installation window to complete the installation
   7. Restart the computer.

---

Driver Version Verification

1. Run Device Manager.
2. Double-click Conexant High Definition SmartAudio 221 under Sound, video and game controllers.
3. Click the Driver tab and verify that the driver version is 4.36.10.0.

This driver is needed to insure the proper operation of the sound device in your computer. This driver is required for playback of Wave and MIDI files.

---

Change Points

1. Corrected an issue where the internal microphone volume is to low during an internet phone call or recording.

---

Installation Instructions

1. Save this file to a convenient location such as the Windows Desktop
2. Uninstall the existing Conexant Audio Driver by clicking Start, Control Panel, Uninstall a Program under the Programs heading, Conexant HD Audio, then Uninstall.
3. Restart the computer.
4. On the Windows Desktop, double-click the downloaded file to start the installation.
   1. Click OK, Unzip then OK again.
   2. If a User Account Control message is displayed, click Continue.
   3. A device driver installation wizard window will be displayed.
   4. Click OK at the Device driver installation window to start the installation
   5. A device driver installation wizard window will be displayed.
   6. Click OK at the Device driver installation window to complete the installation
   7. Restart the computer.

---

Driver Version Verification

1. Run Device Manager.
2. Double-click Conexant High Definition SmartAudio 221 under Sound, video and game controllers.
3. Click the Driver tab and verify that the driver version is 4.36.10.0.

This driver is needed to insure the proper operation of the sound device in your computer. This driver is required for playback of Wave and MIDI files.

---

Change Points

1. Corrected an issue where the internal microphone volume is to low during an internet phone call or recording.

---

Installation Instructions

1. Save this file to a convenient location such as the Windows Desktop
2. Uninstall the existing Conexant Audio Driver by clicking Start, Control Panel, Uninstall a Program under the Programs heading, Conexant HD Audio, then Uninstall.
3. Restart the computer.
4. On the Windows Desktop, double-click the downloaded file to start the installation.
   1. Click OK, Unzip then OK again.
   2. If a User Account Control message is displayed, click Continue.
   3. A device driver installation wizard window will be displayed.
   4. Click OK at the Device driver installation window to start the installation
   5. A device driver installation wizard window will be displayed.
   6. Click OK at the Device driver installation window to complete the installation
   7. Restart the computer.

---

Driver Version Verification

1. Run Device Manager.
2. Double-click Conexant High Definition SmartAudio 221 under Sound, video and game controllers.
3. Click the Driver tab and verify that the driver version is 4.36.10.0.

6.10.07T Build 20080424

6.10.07.2T Build 20080512

---

This software component is considered beta for Windows 7 RC and later.

---

This Beta software is provided on an as-is basis. Use at your own risk.

Beta drivers and utilities are sometimes provided by component manufacturers as preview releases for quick bug fixes and access to new features. Beta software is not fully tested by the manufacturer, nor by Toshiba, and may include significant issues. It is the user's responsibility to protect system and data when using Beta software with Toshiba products. It is strongly recommended that users back up all of their data prior to using Beta software from any source. Please ensure that newer released software is not already posted at support.toshiba.com prior to installation and usage of Beta software. Beta software is offered as-is and does not carry any warranties nor support services.

6.2.238.214 UVC 1.7.193.0508L

Install the Intel Chipset SW component before this driver.

Install the Intel Chipset SW component before this driver.

---

This software component is considered beta for Windows 7 RC and later.

---

This Beta software is provided on an as-is basis. Use at your own risk.

Beta drivers and utilities are sometimes provided by component manufacturers as preview releases for quick bug fixes and access to new features. Beta software is not fully tested by the manufacturer, nor by Toshiba, and may include significant issues. It is the user's responsibility to protect system and data when using Beta software with Toshiba products. It is strongly recommended that users back up all of their data prior to using Beta software from any source. Please ensure that newer released software is not already posted at support.toshiba.com prior to installation and usage of Beta software. Beta software is offered as-is and does not carry any warranties nor support services.

Uninstall old driver before installing this one.
For Marvell 8040T/8055/8072

---

This software component is considered beta

---

This software component is considered beta

8.477-080407a-063057C

8.477-080470a-063055C

Intel VGA 4ID logo driver v8.15.10.1883 HDMI audio v6.10.1.2077 for Intel Montevina platform

Intel VGA 4ID logo driver v8.15.10.1883 HDMI audio v6.10.1.2077 for Intel Montevina platform

This is the driver for the Wireless LAN controller. It is needed for the Wireless LAN controller to function properly.

---

Change Points

1. Fixed: data transfer may stop temporarily under the following conditions.
   1. Computer with an Atheros W-LAN card is connected to an Access Point using 11n mode.
   2. Computer is being stressed - stress tests, multiple high-bandwidth applications, etc.
   3. Noisy environment - radio waves around the computer.

---

Wireless LAN Card Check

1. Run device manager.
2. If any of the following adapters are found under "Network adapters", apply Driver: 7.7.0.288.0. If none of the adapters are found, then this driver is not for your computer.
   • Atheros AR9280 Wireless Network Adapter
   • Atheros AR9281 Wireless Network Adapter
   • Atheros AR9283 Wireless Network Adapter
   • Atheros AR9285 Wireless Network Adapter

---

Installation Instructions

1. Save this file to a convenient location such as the Windows Desktop.
2. Save all work in progress, and close all applications.
3. Double click the downloaded driver to begin the install.
4. Click OK, then click Unzip.
5. Click OK, then click Continue if a User Account Control window is displayed.
6. Click Next to begin installing the new Atheros driver.
7. Click Finish.
8. Click Next, after selecting the Atheros Client language. English is the default.
9. Click Next, to begin installing the Atheros Client.
10. Click I accept the terms... then click Next.
11. Click Finish.
12. Restart the computer.

For silent installs
Please run "Setup.exe /s"

---

Driver Version Verification

1. Run Device Manager.
2. Open properties of the appropriate Atheros Wireless "Network adapter".
   • Atheros AR9280 Wireless Network Adapter
   • Atheros AR9281 Wireless Network Adapter
   • Atheros AR9283 Wireless Network Adapter
   • Atheros AR9285 Wireless Network Adapter
3. Verify that the Driver Version is 7.7.0.288.
4. Click Driver Details... in the Driver tab.
5. Select athr.sys or athrx.sys.
6. Verify that the File version is 7.7.0.288.

---

1.0.0.196.0.s3264_wCAT

version: 12.4.0.21.1.v32_wCAT.RC

---

This software component is considered beta for Windows 7 RC and later.

---

This Beta software is provided on an "as-is" basis. Use at your own risk.

Beta drivers and utilities are sometimes provided by component manufacturers as preview releases for quick bug fixes and access to new features. Beta software is not fully tested by the manufacturer, nor by Toshiba, and may include significant issues. It is the user's responsibility to protect system and data when using Beta software with Toshiba products. It is strongly recommended that users back up all of their data prior to using Beta software from any source. Please ensure that newer released software is not already posted at support.toshiba.com prior to installation and usage of Beta software. Beta software is offered "as is" and does not carry any warranties nor support services.

version: 12.4.0.21.1.v64_wCAT

---

This software component is considered beta for Windows 7 RC and later.

---

This Beta software is provided on an "as-is" basis. Use at your own risk.

Beta drivers and utilities are sometimes provided by component manufacturers as preview releases for quick bug fixes and access to new features. Beta software is not fully tested by the manufacturer, nor by Toshiba, and may include significant issues. It is the user's responsibility to protect system and data when using Beta software with Toshiba products. It is strongly recommended that users back up all of their data prior to using Beta software from any source. Please ensure that newer released software is not already posted at support.toshiba.com prior to installation and usage of Beta software. Beta software is offered "as is" and does not carry any warranties nor support services.

Driver version: RTL8187B 62.1176.0812.2009 RTL8187SE 6.9105.0812.2009 RTL8191SE 2006.4.0909.2009 RTL8192E 1676.9.0909.2009

Reduces CD/DVD drive mechanical sound level when playing back audio or video content.

Patch for adding the registry entries for Devices and Printers.

Install after Toshiba Value Add Package (TVAP)

---

This patch is workaround for following issues on Windows7.

1. 1. Internal SATA devices may not be detected as removal device.
2. 2. Some ODDs does not detected.

Change History

• Version 1.10 - 2008-07-14
  • First production BIOS release for these models.

Change History

• Version 1.40 - 2008-09-10
  • Corrected: Noise that can be heard when a Fujitsu HDD is powered on.
  • Changed: Wake-up on LAN/Wireless LAN can be selected in Windows even though the setting is disabled in BIOS set up, to Wake-up on LAN/Wireless LAN is set to disabled in Windows when it is disabled in BIOS set up.
  • Corrected: Memory size is incorrect on computers configured with the Intel 945GM chipset.
  • Changed: Internal LCD is fixed/set to be Primary and External CRT is fixed/set to be Secondary in extended mode, to Internal LCD and External LCD can be selected as Primary or Secondary.
  • Corrected: WLK ((Windows Logo Kit) version 1.2 fails.
  • Corrected: The refresh rate for the LCD showed 58MHz, and now shows 60MHz.
  • Disabled: Intel Top Swap supported by Intel Chip Set ICH9.
  • Updated the HDCP (HD Copy Protection) code.
  • Corrected: Western Digital HDD boot issue.
  • Corrected: The BIOS could be updated in battery mode in the previous version.
  • Corrected: Toshiba Management Console can not be installed.
  Version 1.10 - 2008-07-14
  • First production BIOS release for these models.

Change History

• Version 1.40 - 2008-09-10
  • Corrected: Noise that can be heard when a Fujitsu HDD is powered on.
  • Changed: Wake-up on LAN/Wireless LAN can be selected in Windows even though the setting is disabled in BIOS set up, to Wake-up on LAN/Wireless LAN is set to disabled in Windows when it is disabled in BIOS set up.
  • Corrected: Memory size is incorrect on computers configured with the Intel 945GM chipset.
  • Changed: Internal LCD is fixed/set to be Primary and External CRT is fixed/set to be Secondary in extended mode, to Internal LCD and External LCD can be selected as Primary or Secondary.
  • Corrected: WLK ((Windows Logo Kit) version 1.2 fails.
  • Corrected: The refresh rate on the LCD showed 58MHz, and now shows 60MHz.
  • Disabled: Intel Top Swap supported by Intel Chip Set ICH9.
  • Updated the HDCP (HD Copy Protection) code.
  • Corrected: Western Digital HDD boot issue.
  • Changed: BIOS can be updated in battery mode on the previous BIOS, to BIOS can not be updated on battery mode.
  • Corrected: Toshiba Management Console can not be installed.
  Version 1.10 - 2008-07-14
  • First production release for these models.

Change History

• Version 3.20 - 2009-01-13
  • Improved: LCD panel flashes one time while booting on PCs that support LG panels.
  • Improved: When the customer sets the BIOS Password in BIOS Setup menu then shuts down the PC by pressing power button, the BIOS Password is not set. (BIOS PW should have been set)
  • Improved: The BIOS can not be updated by Winflash64.
  • Improved: Bluetooth Icon appears when FN F8 is pressed on PCs that do not support Bluetooth.
  • Improved: Bluetooth Icon appears when FN F8 is pressed on PCs that do not support Bluetooth.
  • Improved: Pass rate of the Treboot test.
  • Updated: Intel Kernel Code r1.100.
  • Improved: BIOS Password issue.
  • Improved: Windows XP Intel Wireless LAN can not detect Access Points.
  • Improved: CRID becomes disabled after a Standby/Resume.
  • Improved: Noise can be heard from Fujitsu HDDs after Standby, Hibernation, or Shut Down.
  • Added: Function control for PCs that support WiMax.
  • Improved: A CIR device appears in Device manager on computers without CIR.
  • Improved: When the PC is in Standby (Sleep), the computer does not resume when the battery capacity goes below 5%, and battery capacity drains to 0%.
  • Improved: A modem appears in Device manager on computers without Modems.
  • Improved: A TV Device appears when FN F5 is pressed on computers without TV-Out (S-Video).
  • Updated: Intel Micro Code.
  • Improved: Wake On LAN function can not disabled.
  • Improved: The computer does not resume from Standby mode when the USB Mouse or Keyboard is moved even though the USB Wakeup Function is enabled.
  Version 1.40 - 2008-09-10
  • Corrected: Noise that can be heard when a Fujitsu HDD is powered on.
  • Changed: Wake-up on LAN/Wireless LAN can be selected in Windows even though the setting is disabled in BIOS set up, to Wake-up on LAN/Wireless LAN is set to disabled in Windows when it is disabled in BIOS set up.
  • Corrected: Memory size is incorrect on computers configured with the Intel 945GM chipset.
  • Changed: Internal LCD is fixed/set to be Primary and External CRT is fixed/set to be Secondary in extended mode, to Internal LCD and External LCD can be selected as Primary or Secondary.
  • Corrected: WLK ((Windows Logo Kit) version 1.2 fails.
  • Corrected: The refresh rate for the LCD showed 58MHz, and now shows 60MHz.
  • Disabled: Intel Top Swap supported by Intel Chip Set ICH9.
  • Updated the HDCP (HD Copy Protection) code.
  • Corrected: Western Digital HDD boot issue.
  • Corrected: The BIOS could be updated in battery mode in the previous version.
  • Corrected: Toshiba Management Console can not be installed.
  Version 1.10 - 2008-07-14
  • First production BIOS release for these models.

Change History

• Version 3.20 - 2009-01-13
  • Improved: LCD panel flashes one time while booting on PCs that support LG panels.
  • Improved: When the customer sets the BIOS Password in BIOS Setup menu then shuts down the PC by pressing power button, the BIOS Password is not set. (BIOS PW should have been set)
  • Improved: The BIOS can not be updated by Winflash64.
  • Improved: Bluetooth Icon appears when FN F8 is pressed on PCs that do not support Bluetooth.
  • Improved: The PC hangs when booting while pressing F12 to display the boot select menu.
  • Improved: Pass rate of the Treboot test.
  • Updated: Intel Kernel Code r1.100.
  • Improved: BIOS Password issue.
  • Improved: Windows XP Intel Wireless LAN can not detect Access Points.
  • Improved: CRID becomes disabled after a Standby/Resume.
  • Improved: Noise can be heard from Fujitsu HDDs after Standby, Hibernation, or Shut Down.
  • Added: Function control for PCs that support WiMax.
  • Improved: A CIR device appears in Device manager on computers without CIR.
  • Improved: When the PC is in Standby (Sleep), the computer does not resume when the battery capacity goes below 5%, and battery capacity drains to 0%.
  • Improved: A modem appears in Device manager on computers without Modems.
  • Improved: A TV Device appears when FN F5 is pressed on computers without TV-Out (S-Video).
  • Updated: Intel Micro Code.
  • Improved: Wake On LAN function can not disabled.
  • Improved: The computer does not resume from Standby mode when the USB Mouse or Keyboard is moved even though the USB Wakeup Function is enabled.
  Version 1.40 - 2008-09-10
  • Corrected: Noise that can be heard when a Fujitsu HDD is powered on.
  • Changed: Wake-up on LAN/Wireless LAN can be selected in Windows even though the setting is disabled in BIOS set up, to Wake-up on LAN/Wireless LAN is set to disabled in Windows when it is disabled in BIOS set up.
  • Corrected: Memory size is incorrect on computers configured with the Intel 945GM chipset.
  • Changed: Internal LCD is fixed/set to be Primary and External CRT is fixed/set to be Secondary in extended mode, to Internal LCD and External LCD can be selected as Primary or Secondary.
  • Corrected: WLK ((Windows Logo Kit) version 1.2 fails.
  • Corrected: The refresh rate on the LCD showed 58MHz, and now shows 60MHz.
  • Disabled: Intel Top Swap supported by Intel Chip Set ICH9.
  • Updated the HDCP (HD Copy Protection) code.
  • Corrected: Western Digital HDD boot issue.
  • Changed: BIOS can be updated in battery mode on the previous BIOS, to BIOS can not be updated on battery mode.
  • Corrected: Toshiba Management Console can not be installed.
  Version 1.10 - 2008-07-14
  • First production release for these models.

Change History

• Version 3.30 - 2009-03-03
  • Fixed: Numlock stays on even after rebooting. (Included external USB keyboard sync internal keyboard issue.)
  • Added support for the 65W AC adapter constant power function.
  • Updated kernel code to r1.106 (include MRC2.5).
  • Included EC 83h command for UMA platform.
  Version 3.20 - 2009-01-13
  • Improved: LCD panel flashes one time while booting on PCs that support LG panels.
  • Improved: When the customer sets the BIOS Password in BIOS Setup menu then shuts down the PC by pressing power button, the BIOS Password is not set. (BIOS PW should have been set)
  • Improved: The BIOS can not be updated by Winflash64.
  • Improved: Bluetooth Icon appears when FN F8 is pressed on PCs that do not support Bluetooth.
  • Improved: Bluetooth Icon appears when FN F8 is pressed on PCs that do not support Bluetooth.
  • Improved: Pass rate of the Treboot test.
  • Updated: Intel Kernel Code r1.100.
  • Improved: BIOS Password issue.
  • Improved: Windows XP Intel Wireless LAN can not detect Access Points.
  • Improved: CRID becomes disabled after a Standby/Resume.
  • Improved: Noise can be heard from Fujitsu HDDs after Standby, Hibernation, or Shut Down.
  • Added: Function control for PCs that support WiMax.
  • Improved: A CIR device appears in Device manager on computers without CIR.
  • Improved: When the PC is in Standby (Sleep), the computer does not resume when the battery capacity goes below 5%, and battery capacity drains to 0%.
  • Improved: A modem appears in Device manager on computers without Modems.
  • Improved: A TV Device appears when FN F5 is pressed on computers without TV-Out (S-Video).
  • Updated: Intel Micro Code.
  • Improved: Wake On LAN function can not disabled.
  • Improved: The computer does not resume from Standby mode when the USB Mouse or Keyboard is moved even though the USB Wakeup Function is enabled.
  Version 1.40 - 2008-09-10
  • Corrected: Noise that can be heard when a Fujitsu HDD is powered on.
  • Changed: Wake-up on LAN/Wireless LAN can be selected in Windows even though the setting is disabled in BIOS set up, to Wake-up on LAN/Wireless LAN is set to disabled in Windows when it is disabled in BIOS set up.
  • Corrected: Memory size is incorrect on computers configured with the Intel 945GM chipset.
  • Changed: Internal LCD is fixed/set to be Primary and External CRT is fixed/set to be Secondary in extended mode, to Internal LCD and External LCD can be selected as Primary or Secondary.
  • Corrected: WLK ((Windows Logo Kit) version 1.2 fails.
  • Corrected: The refresh rate for the LCD showed 58MHz, and now shows 60MHz.
  • Disabled: Intel Top Swap supported by Intel Chip Set ICH9.
  • Updated the HDCP (HD Copy Protection) code.
  • Corrected: Western Digital HDD boot issue.
  • Corrected: The BIOS could be updated in battery mode in the previous version.
  • Corrected: Toshiba Management Console can not be installed.
  Version 1.10 - 2008-07-14
  • First production BIOS release for these models.

Change History

• Version 3.60 - 2009-03-31
  • Updated: MRC to version 2.6.
  • Improved: Reboot issue.
  • Improved: Can't detect a Bluetooth device.
  • Improved: Disk recovery issue.
  Version 3.30 - 2009-03-03
  • Fixed: Numlock stays on even after rebooting. (Included external USB keyboard sync internal keyboard issue.)
  • Added support for the 65W AC adapter constant power function.
  • Updated kernel code to r1.106 (include MRC2.5).
  • Included EC 83h command for UMA platform.
  Version 3.20 - 2009-01-13
  • Improved: LCD panel flashes one time while booting on PCs that support LG panels.
  • Improved: When the customer sets the BIOS Password in BIOS Setup menu then shuts down the PC by pressing power button, the BIOS Password is not set. (BIOS PW should have been set)
  • Improved: The BIOS can not be updated by Winflash64.
  • Improved: Bluetooth Icon appears when FN F8 is pressed on PCs that do not support Bluetooth.
  • Improved: Bluetooth Icon appears when FN F8 is pressed on PCs that do not support Bluetooth.
  • Improved: Pass rate of the Treboot test.
  • Updated: Intel Kernel Code r1.100.
  • Improved: BIOS Password issue.
  • Improved: Windows XP Intel Wireless LAN can not detect Access Points.
  • Improved: CRID becomes disabled after a Standby/Resume.
  • Improved: Noise can be heard from Fujitsu HDDs after Standby, Hibernation, or Shut Down.
  • Added: Function control for PCs that support WiMax.
  • Improved: A CIR device appears in Device manager on computers without CIR.
  • Improved: When the PC is in Standby (Sleep), the computer does not resume when the battery capacity goes below 5%, and battery capacity drains to 0%.
  • Improved: A modem appears in Device manager on computers without Modems.
  • Improved: A TV Device appears when FN F5 is pressed on computers without TV-Out (S-Video).
  • Updated: Intel Micro Code.
  • Improved: Wake On LAN function can not disabled.
  • Improved: The computer does not resume from Standby mode when the USB Mouse or Keyboard is moved even though the USB Wakeup Function is enabled.
  Version 1.40 - 2008-09-10
  • Corrected: Noise that can be heard when a Fujitsu HDD is powered on.
  • Changed: Wake-up on LAN/Wireless LAN can be selected in Windows even though the setting is disabled in BIOS set up, to Wake-up on LAN/Wireless LAN is set to disabled in Windows when it is disabled in BIOS set up.
  • Corrected: Memory size is incorrect on computers configured with the Intel 945GM chipset.
  • Changed: Internal LCD is fixed/set to be Primary and External CRT is fixed/set to be Secondary in extended mode, to Internal LCD and External LCD can be selected as Primary or Secondary.
  • Corrected: WLK ((Windows Logo Kit) version 1.2 fails.
  • Corrected: The refresh rate for the LCD showed 58MHz, and now shows 60MHz.
  • Disabled: Intel Top Swap supported by Intel Chip Set ICH9.
  • Updated the HDCP (HD Copy Protection) code.
  • Corrected: Western Digital HDD boot issue.
  • Corrected: The BIOS could be updated in battery mode in the previous version.
  • Corrected: Toshiba Management Console can not be installed.
  Version 1.10 - 2008-07-14
  • First production BIOS release for these models.

Change History

• Version 3.70 - 2009-04-10
  • Improved: The wrong memory size is displayed in Vista.
  Version 3.60 - 2009-03-31
  • Updated: MRC to version 2.6.
  • Improved: Reboot issue.
  • Improved: Can't detect a Bluetooth device.
  • Improved: Disk recovery issue.
  Version 3.30 - 2009-03-03
  • Fixed: Numlock stays on even after rebooting. (Included external USB keyboard sync internal keyboard issue.)
  • Added support for the 65W AC adapter constant power function.
  • Updated kernel code to r1.106 (include MRC2.5).
  • Included EC 83h command for UMA platform.
  Version 3.20 - 2009-01-13
  • Improved: LCD panel flashes one time while booting on PCs that support LG panels.
  • Improved: When the customer sets the BIOS Password in BIOS Setup menu then shuts down the PC by pressing power button, the BIOS Password is not set. (BIOS PW should have been set)
  • Improved: The BIOS can not be updated by Winflash64.
  • Improved: Bluetooth Icon appears when FN F8 is pressed on PCs that do not support Bluetooth.
  • Improved: Bluetooth Icon appears when FN F8 is pressed on PCs that do not support Bluetooth.
  • Improved: Pass rate of the Treboot test.
  • Updated: Intel Kernel Code r1.100.
  • Improved: BIOS Password issue.
  • Improved: Windows XP Intel Wireless LAN can not detect Access Points.
  • Improved: CRID becomes disabled after a Standby/Resume.
  • Improved: Noise can be heard from Fujitsu HDDs after Standby, Hibernation, or Shut Down.
  • Added: Function control for PCs that support WiMax.
  • Improved: A CIR device appears in Device manager on computers without CIR.
  • Improved: When the PC is in Standby (Sleep), the computer does not resume when the battery capacity goes below 5%, and battery capacity drains to 0%.
  • Improved: A modem appears in Device manager on computers without Modems.
  • Improved: A TV Device appears when FN F5 is pressed on computers without TV-Out (S-Video).
  • Updated: Intel Micro Code.
  • Improved: Wake On LAN function can not disabled.
  • Improved: The computer does not resume from Standby mode when the USB Mouse or Keyboard is moved even though the USB Wakeup Function is enabled.
  Version 1.40 - 2008-09-10
  • Corrected: Noise that can be heard when a Fujitsu HDD is powered on.
  • Changed: Wake-up on LAN/Wireless LAN can be selected in Windows even though the setting is disabled in BIOS set up, to Wake-up on LAN/Wireless LAN is set to disabled in Windows when it is disabled in BIOS set up.
  • Corrected: Memory size is incorrect on computers configured with the Intel 945GM chipset.
  • Changed: Internal LCD is fixed/set to be Primary and External CRT is fixed/set to be Secondary in extended mode, to Internal LCD and External LCD can be selected as Primary or Secondary.
  • Corrected: WLK ((Windows Logo Kit) version 1.2 fails.
  • Corrected: The refresh rate for the LCD showed 58MHz, and now shows 60MHz.
  • Disabled: Intel Top Swap supported by Intel Chip Set ICH9.
  • Updated the HDCP (HD Copy Protection) code.
  • Corrected: Western Digital HDD boot issue.
  • Corrected: The BIOS could be updated in battery mode in the previous version.
  • Corrected: Toshiba Management Console can not be installed.
  Version 1.10 - 2008-07-14
  • First production BIOS release for these models.

Change History

• Version 3.80 - 2009-06-04
  • Fixed: When a blank notepad window is opened and the volume wheel is turned, "c" characters may be automatically input.
  Version 3.70 - 2009-04-10
  • Improved: The wrong memory size is displayed in Vista.
  Version 3.60 - 2009-03-31
  • Updated: MRC to version 2.6.
  • Improved: Reboot issue.
  • Improved: Can't detect a Bluetooth device.
  • Improved: Disk recovery issue.
  Version 3.30 - 2009-03-03
  • Fixed: Numlock stays on even after rebooting. (Included external USB keyboard sync internal keyboard issue.)
  • Added support for the 65W AC adapter constant power function.
  • Updated kernel code to r1.106 (include MRC2.5).
  • Included EC 83h command for UMA platform.
  Version 3.20 - 2009-01-13
  • Improved: LCD panel flashes one time while booting on PCs that support LG panels.
  • Improved: When the customer sets the BIOS Password in BIOS Setup menu then shuts down the PC by pressing power button, the BIOS Password is not set. (BIOS PW should have been set)
  • Improved: The BIOS can not be updated by Winflash64.
  • Improved: Bluetooth Icon appears when FN F8 is pressed on PCs that do not support Bluetooth.
  • Improved: Bluetooth Icon appears when FN F8 is pressed on PCs that do not support Bluetooth.
  • Improved: Pass rate of the Treboot test.
  • Updated: Intel Kernel Code r1.100.
  • Improved: BIOS Password issue.
  • Improved: Windows XP Intel Wireless LAN can not detect Access Points.
  • Improved: CRID becomes disabled after a Standby/Resume.
  • Improved: Noise can be heard from Fujitsu HDDs after Standby, Hibernation, or Shut Down.
  • Added: Function control for PCs that support WiMax.
  • Improved: A CIR device appears in Device manager on computers without CIR.
  • Improved: When the PC is in Standby (Sleep), the computer does not resume when the battery capacity goes below 5%, and battery capacity drains to 0%.
  • Improved: A modem appears in Device manager on computers without Modems.
  • Improved: A TV Device appears when FN F5 is pressed on computers without TV-Out (S-Video).
  • Updated: Intel Micro Code.
  • Improved: Wake On LAN function can not disabled.
  • Improved: The computer does not resume from Standby mode when the USB Mouse or Keyboard is moved even though the USB Wakeup Function is enabled.
  Version 1.40 - 2008-09-10
  • Corrected: Noise that can be heard when a Fujitsu HDD is powered on.
  • Changed: Wake-up on LAN/Wireless LAN can be selected in Windows even though the setting is disabled in BIOS set up, to Wake-up on LAN/Wireless LAN is set to disabled in Windows when it is disabled in BIOS set up.
  • Corrected: Memory size is incorrect on computers configured with the Intel 945GM chipset.
  • Changed: Internal LCD is fixed/set to be Primary and External CRT is fixed/set to be Secondary in extended mode, to Internal LCD and External LCD can be selected as Primary or Secondary.
  • Corrected: WLK ((Windows Logo Kit) version 1.2 fails.
  • Corrected: The refresh rate for the LCD showed 58MHz, and now shows 60MHz.
  • Disabled: Intel Top Swap supported by Intel Chip Set ICH9.
  • Updated the HDCP (HD Copy Protection) code.
  • Corrected: Western Digital HDD boot issue.
  • Corrected: The BIOS could be updated in battery mode in the previous version.
  • Corrected: Toshiba Management Console can not be installed.
  Version 1.10 - 2008-07-14
  • First production BIOS release for these models.

Change History

• Version 4.80 - 2009-09-29
  • Improved: Supervisor password issue - The computer asks for Supervisor password after clearing a User password. The computer should not ask for a Supervisor password if only the Supervisor password is set.
  • Improved: Illumination LEDs are on even when disabled in Setup.
  Version 4.00 - 2009-07-31
  • Improved: Winflash works in Battery (non-AC) mode.
  • Improved: WOL cannot wake from S5 on XP.
  • Added: Check the AC status for x64-bit the Windows flash command.
  Version 3.90 - 2009-06-15
  • Improved: The Illumination LEDs are turned off when the LCD is turned off for Energy Star 5.0.
  Version 3.80 - 2009-06-04
  • Fixed: When a blank notepad window is opened and the volume wheel is turned, "c" characters may be automatically input.
  Version 3.70 - 2009-04-10
  • Improved: The wrong memory size is displayed in Vista.
  Version 3.60 - 2009-03-31
  • Updated: MRC to version 2.6.
  • Improved: Reboot issue.
  • Improved: Can't detect a Bluetooth device.
  • Improved: Disk recovery issue.
  Version 3.30 - 2009-03-03
  • Fixed: Numlock stays on even after rebooting. (Included external USB keyboard sync internal keyboard issue.)
  • Added support for the 65W AC adapter constant power function.
  • Updated kernel code to r1.106 (include MRC2.5).
  • Included EC 83h command for UMA platform.
  Version 3.20 - 2009-01-13
  • Improved: LCD panel flashes one time while booting on PCs that support LG panels.
  • Improved: When the customer sets the BIOS Password in BIOS Setup menu then shuts down the PC by pressing power button, the BIOS Password is not set. (BIOS PW should have been set)
  • Improved: The BIOS can not be updated by Winflash64.
  • Improved: Bluetooth Icon appears when FN F8 is pressed on PCs that do not support Bluetooth.
  • Improved: Bluetooth Icon appears when FN F8 is pressed on PCs that do not support Bluetooth.
  • Improved: Pass rate of the Treboot test.
  • Updated: Intel Kernel Code r1.100.
  • Improved: BIOS Password issue.
  • Improved: Windows XP Intel Wireless LAN can not detect Access Points.
  • Improved: CRID becomes disabled after a Standby/Resume.
  • Improved: Noise can be heard from Fujitsu HDDs after Standby, Hibernation, or Shut Down.
  • Added: Function control for PCs that support WiMax.
  • Improved: A CIR device appears in Device manager on computers without CIR.
  • Improved: When the PC is in Standby (Sleep), the computer does not resume when the battery capacity goes below 5%, and battery capacity drains to 0%.
  • Improved: A modem appears in Device manager on computers without Modems.
  • Improved: A TV Device appears when FN F5 is pressed on computers without TV-Out (S-Video).
  • Updated: Intel Micro Code.
  • Improved: Wake On LAN function can not disabled.
  • Improved: The computer does not resume from Standby mode when the USB Mouse or Keyboard is moved even though the USB Wakeup Function is enabled.
  Version 1.40 - 2008-09-10
  • Corrected: Noise that can be heard when a Fujitsu HDD is powered on.
  • Changed: Wake-up on LAN/Wireless LAN can be selected in Windows even though the setting is disabled in BIOS set up, to Wake-up on LAN/Wireless LAN is set to disabled in Windows when it is disabled in BIOS set up.
  • Corrected: Memory size is incorrect on computers configured with the Intel 945GM chipset.
  • Changed: Internal LCD is fixed/set to be Primary and External CRT is fixed/set to be Secondary in extended mode, to Internal LCD and External LCD can be selected as Primary or Secondary.
  • Corrected: WLK ((Windows Logo Kit) version 1.2 fails.
  • Corrected: The refresh rate for the LCD showed 58MHz, and now shows 60MHz.
  • Disabled: Intel Top Swap supported by Intel Chip Set ICH9.
  • Updated the HDCP (HD Copy Protection) code.
  • Corrected: Western Digital HDD boot issue.
  • Corrected: The BIOS could be updated in battery mode in the previous version.
  • Corrected: Toshiba Management Console can not be installed.
  Version 1.10 - 2008-07-14
  • First production BIOS release for these models.

Release Notes

• After the update completes, the computer will automatically shut down or restart.
• Power on the computer if it is off.
• While the "Toshiba" LOGO is displayed, press the F2 function key to start BIOS Setup.
• Check the version of BIOS and press the F9 function key to load setup defaults.
• Press the F10 function key to save settings and exit. The computer will automatically reboot.

Change History

• Version 5.00 - 2010-10-26
  • Fixed: S4 resume issues.
  • Fixed: Wake on WLAN issues.
  • Added: SLP2.1.
  Version 4.80 - 2009-09-29
  • Improved: Supervisor password issue - The computer asks for Supervisor password after clearing a User password. The computer should not ask for a Supervisor password if only the Supervisor password is set.
  • Improved: Illumination LEDs are on even when disabled in Setup.
  Version 4.00 - 2009-07-31
  • Improved: Winflash works in Battery (non-AC) mode.
  • Improved: WOL cannot wake from S5 on XP.
  • Added: Check the AC status for x64-bit the Windows flash command.
  Version 3.90 - 2009-06-15
  • Improved: The Illumination LEDs are turned off when the LCD is turned off for Energy Star 5.0.
  Version 3.80 - 2009-06-04
  • Fixed: When a blank notepad window is opened and the volume wheel is turned, "c" characters may be automatically input.
  Version 3.70 - 2009-04-10
  • Improved: The wrong memory size is displayed in Vista.
  Version 3.60 - 2009-03-31
  • Updated: MRC to version 2.6.
  • Improved: Reboot issue.
  • Improved: Can't detect a Bluetooth device.
  • Improved: Disk recovery issue.
  Version 3.30 - 2009-03-03
  • Fixed: Numlock stays on even after rebooting. (Included external USB keyboard sync internal keyboard issue.)
  • Added support for the 65W AC adapter constant power function.
  • Updated kernel code to r1.106 (include MRC2.5).
  • Included EC 83h command for UMA platform.
  Version 3.20 - 2009-01-13
  • Improved: LCD panel flashes one time while booting on PCs that support LG panels.
  • Improved: When the customer sets the BIOS Password in BIOS Setup menu then shuts down the PC by pressing power button, the BIOS Password is not set. (BIOS PW should have been set)
  • Improved: The BIOS can not be updated by Winflash64.
  • Improved: Bluetooth Icon appears when FN F8 is pressed on PCs that do not support Bluetooth.
  • Improved: Bluetooth Icon appears when FN F8 is pressed on PCs that do not support Bluetooth.
  • Improved: Pass rate of the Treboot test.
  • Updated: Intel Kernel Code r1.100.
  • Improved: BIOS Password issue.
  • Improved: Windows XP Intel Wireless LAN can not detect Access Points.
  • Improved: CRID becomes disabled after a Standby/Resume.
  • Improved: Noise can be heard from Fujitsu HDDs after Standby, Hibernation, or Shut Down.
  • Added: Function control for PCs that support WiMax.
  • Improved: A CIR device appears in Device manager on computers without CIR.
  • Improved: When the PC is in Standby (Sleep), the computer does not resume when the battery capacity goes below 5%, and battery capacity drains to 0%.
  • Improved: A modem appears in Device manager on computers without Modems.
  • Improved: A TV Device appears when FN F5 is pressed on computers without TV-Out (S-Video).
  • Updated: Intel Micro Code.
  • Improved: Wake On LAN function can not disabled.
  • Improved: The computer does not resume from Standby mode when the USB Mouse or Keyboard is moved even though the USB Wakeup Function is enabled.
  Version 1.40 - 2008-09-10
  • Corrected: Noise that can be heard when a Fujitsu HDD is powered on.
  • Changed: Wake-up on LAN/Wireless LAN can be selected in Windows even though the setting is disabled in BIOS set up, to Wake-up on LAN/Wireless LAN is set to disabled in Windows when it is disabled in BIOS set up.
  • Corrected: Memory size is incorrect on computers configured with the Intel 945GM chipset.
  • Changed: Internal LCD is fixed/set to be Primary and External CRT is fixed/set to be Secondary in extended mode, to Internal LCD and External LCD can be selected as Primary or Secondary.
  • Corrected: WLK ((Windows Logo Kit) version 1.2 fails.
  • Corrected: The refresh rate for the LCD showed 58MHz, and now shows 60MHz.
  • Disabled: Intel Top Swap supported by Intel Chip Set ICH9.
  • Updated the HDCP (HD Copy Protection) code.
  • Corrected: Western Digital HDD boot issue.
  • Corrected: The BIOS could be updated in battery mode in the previous version.
  • Corrected: Toshiba Management Console can not be installed.
  Version 1.10 - 2008-07-14
  • First production BIOS release for these models.

This is a registry patch that corrects a problem where Toshiba Utilities such as Flash Cards, Zooming, and ECO Utilities, will not work after using the Windows 7 "Restore from System Image Backup" feature.

Install Instructions

1. Save the file to the Windows Desktop.
2. Save all work in progress and close open applications.
3. On the Windows Desktop, double-click the downloaded file to start the installation.
4. Click Start at the TOSHIBA Archive Extractor window.
5. Click Yes if a User Account Control window is displayed.
6. The program will complete quickly.
7. Restart the computer.
8. Toshiba Utilities will work normally again.

CLICK HERE to go to the download of a newer version of Toshiba Service Station for Windows 7/vista/XP.
CLICK HERE to go to the download of a newer version of Toshiba Service Station for Windows 8/Windows 8.1/Windows 10

This application allows your computer to automatically search for TOSHIBA software updates or other alerts from TOSHIBA that are specific to your computer system and its programs. When enabled, this application periodically transmits to our servers a limited amount of system information required to perform these updates or alerts. This feature is enabled by default.

Changes in this update

1. This update fixes Security Vulnerabilities discussed in Toshiba Service Station Security Update.
   

   Installation Instructions

   1. Download and save this file to a convenient location such as the Windows Desktop.
   2. Save all work in progress and close open applications.
   3. Double-click the downloaded file TC00398200D.exe to start the installation.
   4. Press the Start button at the Toshiba Archive Extractor window.
   5. Press Yes if a User Account Control message is displayed.
   6. If Toshiba Service Station 2.1.14 is applied successfully, the message below will be shown.

This is a Bluetooth Stack for Windows by Toshiba update

Changes in this update

1. This update fixes Security Vulnerabilities discussed in Toshiba Bluetooth Stack Security Update.
   

   Installation Instructions

   1. Download and save this file to a convenient location such as the Windows Desktop.
   2. Save all work in progress and close open applications.
   3. Double-click the downloaded file TC00636200a.exe to start the installation.
   4. Press the Start button at the Toshiba Archive Extractor window.
   5. Press Yes if a User Account Control message is displayed.
   6. If Bluetooth Stack for Windows by Toshiba v9.10.32(T) is applied successfully, the message below will be shown. Click Yes to restart the system.

---

This software component is considered beta for Windows 7 RC and later.

---

This Beta software is provided on an "as-is" basis. Use at your own risk.

Beta drivers and utilities are sometimes provided by component manufacturers as preview releases for quick bug fixes and access to new features. Beta software is not fully tested by the manufacturer, nor by Toshiba, and may include significant issues. It is the user's responsibility to protect system and data when using Beta software with Toshiba products. It is strongly recommended that users back up all of their data prior to using Beta software from any source. Please ensure that newer released software is not already posted at support.toshiba.com prior to installation and usage of Beta software. Beta software is offered "as is" and does not carry any warranties nor support services.

Toshiba Assist provides easy access to Setup, Support and Help, using the Toshiba Assist button or icon.

ConfigFree ^{â„¢} is a set of utilities used for configuring Toshiba PCs to use both wired and wireless network devices.

ConfigFree ^{â„¢} is a set of utilities used for configuring Toshiba PCs to use both wired and wireless network devices.

This application can be used to create writable and re-writable optical media on your machine.

This is the Toshiba Face Recognition Utility for the built-in camera.

This is the Toshiba Face Recognition Utility for the built-in camera.

7.11.0.10 AP 2.1.22.0

The TrueSuite Access Manager software works with the computer's fingerprint sensor to allow access to your computer using fingerprint information.

---

Change from previous version

1. Fixed: If OneNote 2007 is minimized and maximized, Password Bank errors will occur.
2. Fixed: Error message "Error: Fail to open sensor" is displayed when the first finger is enrolled.

---

Install Notes

1. Only install this software on applicable Toshiba computer models that are configured with an AuthenTec Fingerprint reader.

---

Install Instructions

1. Save the file to the Windows Desktop

2.Install the new software:

1. On the Windows Desktop, double-click the downloaded file to start the installation.
2. Click OK, then click Unzip.
3. Click OK, then click Continue if a User Account Control window is displayed.
4. Answer the remaining prompts to complete the installation.
5. Restart the computer.

---

Software Version Verification

1. From Windows, activate TrueSuite Access Manager.
2. Click on about on the TrueSuite Access Manager Fingerprint software screen and confirm the version.

---

If upgrading, before installing this utility, please run the TAM uninstaller to remove the old Fingerprint software.http://df.toshiba.com/util_fingerprint_uninstaller_TC00240000A.exe

HW SETUP

The TOSHIBA HWSetup program is a tool that allows you to configure your computer.

To open the TOSHIBA HWSetup program:

1. Click the Start menu.
2. Enter "HWSetup" into the search field.
3. Click "HWSetup" in the search results.
4. The TOSHIBA HWSetup program will open allowing you to personalize certain settings on your computer. Before making any changes, read the information contained in your Owner's Manual about the HWSetup program.

 

---

***NOTE*** This software package is part of the pre-installed software for the applicable products.

---

This software component is considered beta for Windows 7 RC and later.

---

This Beta software is provided on an as-is basis. Use at your own risk.

Beta drivers and utilities are sometimes provided by component manufacturers as preview releases for quick bug fixes and access to new features. Beta software is not fully tested by the manufacturer, nor by Toshiba, and may include significant issues. It is the user's responsibility to protect system and data when using Beta software with Toshiba products. It is strongly recommended that users back up all of their data prior to using Beta software from any source. Please ensure that newer released software is not already posted at support.toshiba.com prior to installation and usage of Beta software. Beta software is offered as-is and does not carry any warranties nor support services.

---

This software component is considered beta for Windows 7 RC and later.

---

This Beta software is provided on an as-is basis. Use at your own risk.

Beta drivers and utilities are sometimes provided by component manufacturers as preview releases for quick bug fixes and access to new features. Beta software is not fully tested by the manufacturer, nor by Toshiba, and may include significant issues. It is the user's responsibility to protect system and data when using Beta software with Toshiba products. It is strongly recommended that users back up all of their data prior to using Beta software from any source. Please ensure that newer released software is not already posted at support.toshiba.com prior to installation and usage of Beta software. Beta software is offered as-is and does not carry any warranties nor support services.

Provides system Fn hotkey support (Instant Security, LCD brightness , Display Switch etc.) on applicable models. This software is a foundation for other Toshiba-provided utilities, and must be installed prior to installing other Toshiba Software.
This program runs in Windows XP.

---

Change Points

Changes were made to correct the following:

1. FN + F5 does not work for limited users.

---

Update Instructions

1. Save the file to a convenient location such as the Windows Desktop.
2. Remove the old version by running the downloaded file once:
   • Double-click the downloaded file.
   • If a User Account Control message is displayed, click Continue.
   • Click OK, Unzip then OK again.
   • Answer the remaining prompts to complete the removal.
   • Restart the computer.
3. Install the new version by running the downloaded file again:
   • Double-click the downloaded file to begin the update.
   • If a User Account Control message is displayed, click Continue.
   • Click OK, Unzip then OK again.
   • Answer the remaining prompts to complete the installation.
   • Restart the computer.

---

Version Verification

1. Click Start, Control Panel, "Add or Remove Programs," then HotKey Utility
2. Verify that 3.0.4.0 is displayed in support information

The Toshiba Extended Tiles

---

This software component is considered beta for Windows 7 RC and later.

---

This Beta software is provided on an "as-is" basis. Use at your own risk.

Beta drivers and utilities are sometimes provided by component manufacturers as preview releases for quick bug fixes and access to new features. Beta software is not fully tested by the manufacturer, nor by Toshiba, and may include significant issues. It is the user's responsibility to protect system and data when using Beta software with Toshiba products. It is strongly recommended that users back up all of their data prior to using Beta software from any source. Please ensure that newer released software is not already posted at support.toshiba.com prior to installation and usage of Beta software. Beta software is offered "as is" and does not carry any warranties nor support services.

Toshiba Power Saver provides a Control Panel for managing power and battery settings. Requires Toshiba ACPI Common Modules (TVALD).

2.2.3.2(RST223MAC02)

SERVICE STATION

This application allows your computer to automatically search for TOSHIBA software updates or other alerts from TOSHIBA that are specific to your computer system and its programs. When enabled, this application periodically transmits to our servers a limited amount of system information required to perform these updates or alerts. This feature is enabled by default.

To open Service Station:

1. Click the Start menu.
2. Enter "Service Station" into the search field.
3. Click "Service Station" in the search results.
4. Service Station will open.

 

To enable / disable Service Station:

1. Click the "View Program Access Information" link located under "Last Update" in the lower Left corner.
2. Toshiba Service Station Access Information window will open.
3. To disable this application (not recommended) click the disable button. To continue using this application click the enable button.

---

***NOTE*** This software package is part of the pre-installed software for the applicable products.

This is a Tool for uninstalling TAM(authentec fingerprint software Truesuite Access Manager)Please run this before installing the Windows 7 Toshiba Fingerprint Utility.

Toshiba Assist provides easy access to Setup, Support and Help, using the Toshiba Assist button or icon.

***NOTE*** This software package is part of the pre-installed software for the applicable products.

The Toshiba Value Added Package includes Toshiba Common Modules as well as Power Saver, Accessibility, Fnesse, Toshiba Utilites, Toshiba Password Utility, Flash Cards, PC Diagnostic, Buttons Support.

---

This software component is considered beta

---

This software component is considered beta for Windows 7 RC and later.

---

This Beta software is provided on an as-is basis. Use at your own risk.

Beta drivers and utilities are sometimes provided by component manufacturers as preview releases for quick bug fixes and access to new features. Beta software is not fully tested by the manufacturer, nor by Toshiba, and may include significant issues. It is the user's responsibility to protect system and data when using Beta software with Toshiba products. It is strongly recommended that users back up all of their data prior to using Beta software from any source. Please ensure that newer released software is not already posted at support.toshiba.com prior to installation and usage of Beta software. Beta software is offered as-is and does not carry any warranties nor support services.

version: 12.4.0.0.3.v32.RC

---

This software component is considered beta for Windows 7 RC and later.

---

This Beta software is provided on an "as-is" basis. Use at your own risk.

Beta drivers and utilities are sometimes provided by component manufacturers as preview releases for quick bug fixes and access to new features. Beta software is not fully tested by the manufacturer, nor by Toshiba, and may include significant issues. It is the user's responsibility to protect system and data when using Beta software with Toshiba products. It is strongly recommended that users back up all of their data prior to using Beta software from any source. Please ensure that newer released software is not already posted at support.toshiba.com prior to installation and usage of Beta software. Beta software is offered "as is" and does not carry any warranties nor support services.

version: 12.4.0.0.3.v64.RC

---

This software component is considered beta for Windows 7 RC and later.

---

This Beta software is provided on an "as-is" basis. Use at your own risk.

Beta drivers and utilities are sometimes provided by component manufacturers as preview releases for quick bug fixes and access to new features. Beta software is not fully tested by the manufacturer, nor by Toshiba, and may include significant issues. It is the user's responsibility to protect system and data when using Beta software with Toshiba products. It is strongly recommended that users back up all of their data prior to using Beta software from any source. Please ensure that newer released software is not already posted at support.toshiba.com prior to installation and usage of Beta software. Beta software is offered "as is" and does not carry any warranties nor support services.

IntelR PROSet/Wireless WiMAX Software v1.4.0 RTM Version

IntelR PROSet/Wireless WiMAX Software v1.4.0 RTM Version

WiFi Drivers must be installed before the WPS Library.