TOSHIBA SATELLITE M305-SP4901C

Toshiba Disc Creator

Toshiba Disc Creator

Toshiba DVD Player

CyberLink PowerCinema

CyberLink PowerCinema Update

Toshiba Speech System Portege M805D-SP2906R, M805-SP2907C, M805-SP2907A, M805-SP2907R, M805D-SP2906C, M805D-SP2906A, R830-S8320, R830-S8310, R830-S8330, R830-SP3164M, R830-SP3131L

Toshiba Speech System

Conexant Audio Driver

Conexant Audio Driver

Conexant Audio Driver

Conexant Audio Driver

This driver is needed to insure the proper operation of the sound device in your computer. This driver is required for playback of Wave and MIDI files.

---

Change Points

1. Corrected an issue where the internal microphone volume is to low during an internet phone call or recording.

---

Installation Instructions

1. Save this file to a convenient location such as the Windows Desktop
2. Uninstall the existing Conexant Audio Driver by clicking Start, Control Panel, Uninstall a Program under the Programs heading, Conexant HD Audio, then Uninstall.
3. Restart the computer.
4. On the Windows Desktop, double-click the downloaded file to start the installation.
   1. Click OK, Unzip then OK again.
   2. If a User Account Control message is displayed, click Continue.
   3. A device driver installation wizard window will be displayed.
   4. Click OK at the Device driver installation window to start the installation
   5. A device driver installation wizard window will be displayed.
   6. Click OK at the Device driver installation window to complete the installation
   7. Restart the computer.

---

Driver Version Verification

1. Run Device Manager.
2. Double-click Conexant High Definition SmartAudio 221 under Sound, video and game controllers.
3. Click the Driver tab and verify that the driver version is 4.36.10.0.

Conexant Audio Driver

Bluetooth Stack

Bluetooth Stack

Camera Utility

Chicony Camera Assistant Software

O2 Micro Card Reader Driver

O2 Card Reader Controller

Intel Chipset Software Installation Utility

Intel Chipset SW Installation Utility

CIR Port Driver

Intel Matrix Storage Manager

Intel Matrix Storage Manager

Intel Robson Technology Driver

Intel Robson Technology Driver

Marvell LAN Driver

Marvell LAN Driver

Conexant Software Modem Driver

Conexant Software Modem Driver

Alps Touch Pad Driver

Alps Touch Pad Driver

Synaptics TouchPad Driver

TRS Driver

TRS Driver

ATI Display Driver

Intel Display Driver

Intel Display Driver

Intel Display Driver

Intel Display Driver

Intel Display Driver

Intel Display Driver

Atheros Wireless LAN Driver

Atheros Wireless LAN Driver (32/64bit) Portege A600-S2201, A600-S2202, A600-SP2801R, A600-SP2801A, A600-ST2232, A600-ST2230, A600-NOWEBCAM, A600-ST2231, A600-SP2801C, A605-P201, A605-P200

Atheros Wireless LAN Driver

Atheros Wireless LAN Driver

Atheros Wireless LAN Driver

Intel Wireless LAN Driver

Intel Wireless LAN Driver

Intel Wireless LAN Driver

Intel Wireless LAN Driver

Realtek Wireless LAN Driver

Realtek Wireless LAN Driver

Toshiba Registry Patch

Toshiba PowerCinema Patch Qosmio F50-Q551, F55-Q503, F55-Q5021, F55-Q5041, F55-Q506, F55-Q502, F55-Q504, G55-Q804, G55-Q803, G55-Q802, G55-Q801

Toshiba PowerCinema Patch

Patch Files

Microsoft Hotfix KB950233-Fixes incorrect total memory reported by msinfo32.exe This is a Microsoft Hotfix intended to correct an incorrect data type used to calculate total physical memory in the the msinfo32.exe tool. This program should be run on Windows Vista 64-bit based Toshiba computers only, and will install a Microsoft update based on the knowledge base article at http://support.microsoft.com/kb/950233.
Installation of this Hotfix will correct the following MSINFO32.EXE issue:
The Microsoft System Information tool (msinfo32.exe) does not disply the amount of physical memory installed correctly in the Vista 64-bit Operating System with 4GB or more memory installed.
Hotfix Installation Instructions
Save the file to a convenient location such as the Windows Desktop.
Double-click the downloaded file to begin the update.

ACPI Flash BIOS version 1.10 for Satellite/Satellite Pro U405/M305
Change HistoryVersion 1.10 - 2008-07-14First production BIOS release for these models.

ACPI Flash BIOS version 1.40 for Satellite/Satellite Pro U405/M305
Change HistoryVersion 1.40 - 2008-09-10Corrected: Noise that can be heard when a Fujitsu HDD is powered on.
Changed: Wake-up on LAN/Wireless LAN can be selected in Windows even though the setting is disabled in BIOS set up, to Wake-up on LAN/Wireless LAN is set to disabled in Windows when it is disabled in BIOS set up.
Corrected: Memory size is incorrect on computers configured with the Intel 945GM chipset.
Changed: Internal LCD is fixed/set to be Primary and External CRT is fixed/set to be Secondary in extended mode, to Internal LCD and External LCD can be selected as Primary or Secondary.
Corrected: WLK ((Windows Logo Kit) version 1.2 fails.
Corrected: The refresh rate for the LCD showed 58MHz, and now shows 60MHz.
Disabled: Intel Top Swap supported by Intel Chip Set ICH9.
Updated the HDCP (HD Copy Protection) code.
Corrected: Western Digital HDD boot issue.
Corrected: The BIOS could be updated in battery mode in the previous version.
Corrected: Toshiba Management Console can not be installed.
Version 1.10 - 2008-07-14First production BIOS release for these models.

ACPI Flash BIOS version 1.40 for Satellite/Satellite Pro U405/M305 (64-bit)
Change HistoryVersion 1.40 - 2008-09-10Corrected: Noise that can be heard when a Fujitsu HDD is powered on.
Changed: Wake-up on LAN/Wireless LAN can be selected in Windows even though the setting is disabled in BIOS set up, to Wake-up on LAN/Wireless LAN is set to disabled in Windows when it is disabled in BIOS set up.
Corrected: Memory size is incorrect on computers configured with the Intel 945GM chipset.
Changed: Internal LCD is fixed/set to be Primary and External CRT is fixed/set to be Secondary in extended mode, to Internal LCD and External LCD can be selected as Primary or Secondary.
Corrected: WLK ((Windows Logo Kit) version 1.2 fails.
Corrected: The refresh rate on the LCD showed 58MHz, and now shows 60MHz.
Disabled: Intel Top Swap supported by Intel Chip Set ICH9.
Updated the HDCP (HD Copy Protection) code.
Corrected: Western Digital HDD boot issue.
Changed: BIOS can be updated in battery mode on the previous BIOS, to BIOS can not be updated on battery mode.
Corrected: Toshiba Management Console can not be installed.
Version 1.10 - 2008-07-14First production release for these models.

ACPI Flash BIOS version 3.20 for Satellite/Satellite Pro U405/M305
Change HistoryVersion 3.20 - 2009-01-13Improved: LCD panel flashes one time while booting on PCs that support LG panels.
Improved: When the customer sets the BIOS Password in BIOS Setup menu then shuts down the PC by pressing power button, the BIOS Password is not set. (BIOS PW should have been set)
Improved: The BIOS can not be updated by Winflash64.
Improved: Bluetooth Icon appears when FN F8 is pressed on PCs that do not support Bluetooth.
Improved: Bluetooth Icon appears when FN F8 is pressed on PCs that do not support Bluetooth.
Improved: Pass rate of the Treboot test.
Updated: Intel Kernel Code r1.100.
Improved: BIOS Password issue.
Improved: Windows XP Intel Wireless LAN can not detect Access Points.
Improved: CRID becomes disabled after a Standby/Resume.
Improved: Noise can be heard from Fujitsu HDDs after Standby, Hibernation, or Shut Down.
Added: Function control for PCs that support WiMax.
Improved: A CIR device appears in Device manager on computers without CIR.
Improved: When the PC is in Standby (Sleep), the computer does not resume when the battery capacity goes below 5%, and battery capacity drains to 0%.
Improved: A modem appears in Device manager on computers without Modems.
Improved: A TV Device appears when FN F5 is pressed on computers without TV-Out (S-Video).
Updated: Intel Micro Code.
Improved: Wake On LAN function can not disabled.
Improved: The computer does not resume from Standby mode when the USB Mouse or Keyboard is moved even though the USB Wakeup Function is enabled.
Version 1.40 - 2008-09-10Corrected: Noise that can be heard when a Fujitsu HDD is powered on.
Changed: Wake-up on LAN/Wireless LAN can be selected in Windows even though the setting is disabled in BIOS set up, to Wake-up on LAN/Wireless LAN is set to disabled in Windows when it is disabled in BIOS set up.
Corrected: Memory size is incorrect on computers configured with the Intel 945GM chipset.
Changed: Internal LCD is fixed/set to be Primary and External CRT is fixed/set to be Secondary in extended mode, to Internal LCD and External LCD can be selected as Primary or Secondary.
Corrected: WLK ((Windows Logo Kit) version 1.2 fails.
Corrected: The refresh rate for the LCD showed 58MHz, and now shows 60MHz.
Disabled: Intel Top Swap supported by Intel Chip Set ICH9.
Updated the HDCP (HD Copy Protection) code.
Corrected: Western Digital HDD boot issue.
Corrected: The BIOS could be updated in battery mode in the previous version.
Corrected: Toshiba Management Console can not be installed.
Version 1.10 - 2008-07-14First production BIOS release for these models.

ACPI Flash BIOS version 3.20 for Satellite/Satellite Pro U405/M305 (64-bit)
Change HistoryVersion 3.20 - 2009-01-13Improved: LCD panel flashes one time while booting on PCs that support LG panels.
Improved: When the customer sets the BIOS Password in BIOS Setup menu then shuts down the PC by pressing power button, the BIOS Password is not set. (BIOS PW should have been set)
Improved: The BIOS can not be updated by Winflash64.
Improved: Bluetooth Icon appears when FN F8 is pressed on PCs that do not support Bluetooth.
Improved: The PC hangs when booting while pressing F12 to display the boot select menu.
Improved: Pass rate of the Treboot test.
Updated: Intel Kernel Code r1.100.
Improved: BIOS Password issue.
Improved: Windows XP Intel Wireless LAN can not detect Access Points.
Improved: CRID becomes disabled after a Standby/Resume.
Improved: Noise can be heard from Fujitsu HDDs after Standby, Hibernation, or Shut Down.
Added: Function control for PCs that support WiMax.
Improved: A CIR device appears in Device manager on computers without CIR.
Improved: When the PC is in Standby (Sleep), the computer does not resume when the battery capacity goes below 5%, and battery capacity drains to 0%.
Improved: A modem appears in Device manager on computers without Modems.
Improved: A TV Device appears when FN F5 is pressed on computers without TV-Out (S-Video).
Updated: Intel Micro Code.
Improved: Wake On LAN function can not disabled.
Improved: The computer does not resume from Standby mode when the USB Mouse or Keyboard is moved even though the USB Wakeup Function is enabled.
Version 1.40 - 2008-09-10Corrected: Noise that can be heard when a Fujitsu HDD is powered on.
Changed: Wake-up on LAN/Wireless LAN can be selected in Windows even though the setting is disabled in BIOS set up, to Wake-up on LAN/Wireless LAN is set to disabled in Windows when it is disabled in BIOS set up.
Corrected: Memory size is incorrect on computers configured with the Intel 945GM chipset.
Changed: Internal LCD is fixed/set to be Primary and External CRT is fixed/set to be Secondary in extended mode, to Internal LCD and External LCD can be selected as Primary or Secondary.
Corrected: WLK ((Windows Logo Kit) version 1.2 fails.
Corrected: The refresh rate on the LCD showed 58MHz, and now shows 60MHz.
Disabled: Intel Top Swap supported by Intel Chip Set ICH9.
Updated the HDCP (HD Copy Protection) code.
Corrected: Western Digital HDD boot issue.
Changed: BIOS can be updated in battery mode on the previous BIOS, to BIOS can not be updated on battery mode.
Corrected: Toshiba Management Console can not be installed.
Version 1.10 - 2008-07-14First production release for these models.

ACPI Flash BIOS version 3.30 for Sat/Sat Pro U405/M305 and Portege M800
Change HistoryVersion 3.30 - 2009-03-03Fixed: Numlock stays on even after rebooting. (Included external USB keyboard sync internal keyboard issue.)
Added support for the 65W AC adapter constant power function.
Updated kernel code to r1.106 (include MRC2.5).
Included EC 83h command for UMA platform.
Version 3.20 - 2009-01-13Improved: LCD panel flashes one time while booting on PCs that support LG panels.
Improved: When the customer sets the BIOS Password in BIOS Setup menu then shuts down the PC by pressing power button, the BIOS Password is not set. (BIOS PW should have been set)
Improved: The BIOS can not be updated by Winflash64.
Improved: Bluetooth Icon appears when FN F8 is pressed on PCs that do not support Bluetooth.
Improved: Bluetooth Icon appears when FN F8 is pressed on PCs that do not support Bluetooth.
Improved: Pass rate of the Treboot test.
Updated: Intel Kernel Code r1.100.
Improved: BIOS Password issue.
Improved: Windows XP Intel Wireless LAN can not detect Access Points.
Improved: CRID becomes disabled after a Standby/Resume.
Improved: Noise can be heard from Fujitsu HDDs after Standby, Hibernation, or Shut Down.
Added: Function control for PCs that support WiMax.
Improved: A CIR device appears in Device manager on computers without CIR.
Improved: When the PC is in Standby (Sleep), the computer does not resume when the battery capacity goes below 5%, and battery capacity drains to 0%.
Improved: A modem appears in Device manager on computers without Modems.
Improved: A TV Device appears when FN F5 is pressed on computers without TV-Out (S-Video).
Updated: Intel Micro Code.
Improved: Wake On LAN function can not disabled.
Improved: The computer does not resume from Standby mode when the USB Mouse or Keyboard is moved even though the USB Wakeup Function is enabled.
Version 1.40 - 2008-09-10Corrected: Noise that can be heard when a Fujitsu HDD is powered on.
Changed: Wake-up on LAN/Wireless LAN can be selected in Windows even though the setting is disabled in BIOS set up, to Wake-up on LAN/Wireless LAN is set to disabled in Windows when it is disabled in BIOS set up.
Corrected: Memory size is incorrect on computers configured with the Intel 945GM chipset.
Changed: Internal LCD is fixed/set to be Primary and External CRT is fixed/set to be Secondary in extended mode, to Internal LCD and External LCD can be selected as Primary or Secondary.
Corrected: WLK ((Windows Logo Kit) version 1.2 fails.
Corrected: The refresh rate for the LCD showed 58MHz, and now shows 60MHz.
Disabled: Intel Top Swap supported by Intel Chip Set ICH9.
Updated the HDCP (HD Copy Protection) code.
Corrected: Western Digital HDD boot issue.
Corrected: The BIOS could be updated in battery mode in the previous version.
Corrected: Toshiba Management Console can not be installed.
Version 1.10 - 2008-07-14First production BIOS release for these models.

ACPI Flash BIOS version 3.60 for Sat/Sat Pro U405/M305 and Portege M800
Change HistoryVersion 3.60 - 2009-03-31Updated: MRC to version 2.6.
Improved: Reboot issue.
Improved: Can't detect a Bluetooth device.
Improved: Disk recovery issue.
Version 3.30 - 2009-03-03Fixed: Numlock stays on even after rebooting. (Included external USB keyboard sync internal keyboard issue.)
Added support for the 65W AC adapter constant power function.
Updated kernel code to r1.106 (include MRC2.5).
Included EC 83h command for UMA platform.
Version 3.20 - 2009-01-13Improved: LCD panel flashes one time while booting on PCs that support LG panels.
Improved: When the customer sets the BIOS Password in BIOS Setup menu then shuts down the PC by pressing power button, the BIOS Password is not set. (BIOS PW should have been set)
Improved: The BIOS can not be updated by Winflash64.
Improved: Bluetooth Icon appears when FN F8 is pressed on PCs that do not support Bluetooth.
Improved: Bluetooth Icon appears when FN F8 is pressed on PCs that do not support Bluetooth.
Improved: Pass rate of the Treboot test.
Updated: Intel Kernel Code r1.100.
Improved: BIOS Password issue.
Improved: Windows XP Intel Wireless LAN can not detect Access Points.
Improved: CRID becomes disabled after a Standby/Resume.
Improved: Noise can be heard from Fujitsu HDDs after Standby, Hibernation, or Shut Down.
Added: Function control for PCs that support WiMax.
Improved: A CIR device appears in Device manager on computers without CIR.
Improved: When the PC is in Standby (Sleep), the computer does not resume when the battery capacity goes below 5%, and battery capacity drains to 0%.
Improved: A modem appears in Device manager on computers without Modems.
Improved: A TV Device appears when FN F5 is pressed on computers without TV-Out (S-Video).
Updated: Intel Micro Code.
Improved: Wake On LAN function can not disabled.
Improved: The computer does not resume from Standby mode when the USB Mouse or Keyboard is moved even though the USB Wakeup Function is enabled.
Version 1.40 - 2008-09-10Corrected: Noise that can be heard when a Fujitsu HDD is powered on.
Changed: Wake-up on LAN/Wireless LAN can be selected in Windows even though the setting is disabled in BIOS set up, to Wake-up on LAN/Wireless LAN is set to disabled in Windows when it is disabled in BIOS set up.
Corrected: Memory size is incorrect on computers configured with the Intel 945GM chipset.
Changed: Internal LCD is fixed/set to be Primary and External CRT is fixed/set to be Secondary in extended mode, to Internal LCD and External LCD can be selected as Primary or Secondary.
Corrected: WLK ((Windows Logo Kit) version 1.2 fails.
Corrected: The refresh rate for the LCD showed 58MHz, and now shows 60MHz.
Disabled: Intel Top Swap supported by Intel Chip Set ICH9.
Updated the HDCP (HD Copy Protection) code.
Corrected: Western Digital HDD boot issue.
Corrected: The BIOS could be updated in battery mode in the previous version.
Corrected: Toshiba Management Console can not be installed.
Version 1.10 - 2008-07-14First production BIOS release for these models.

ACPI Flash BIOS version 3.70 for Sat/Sat Pro U405/M305 and Portege M800
Change HistoryVersion 3.70 - 2009-04-10Improved: The wrong memory size is displayed in Vista.
Version 3.60 - 2009-03-31Updated: MRC to version 2.6.
Improved: Reboot issue.
Improved: Can't detect a Bluetooth device.
Improved: Disk recovery issue.
Version 3.30 - 2009-03-03Fixed: Numlock stays on even after rebooting. (Included external USB keyboard sync internal keyboard issue.)
Added support for the 65W AC adapter constant power function.
Updated kernel code to r1.106 (include MRC2.5).
Included EC 83h command for UMA platform.
Version 3.20 - 2009-01-13Improved: LCD panel flashes one time while booting on PCs that support LG panels.
Improved: When the customer sets the BIOS Password in BIOS Setup menu then shuts down the PC by pressing power button, the BIOS Password is not set. (BIOS PW should have been set)
Improved: The BIOS can not be updated by Winflash64.
Improved: Bluetooth Icon appears when FN F8 is pressed on PCs that do not support Bluetooth.
Improved: Bluetooth Icon appears when FN F8 is pressed on PCs that do not support Bluetooth.
Improved: Pass rate of the Treboot test.
Updated: Intel Kernel Code r1.100.
Improved: BIOS Password issue.
Improved: Windows XP Intel Wireless LAN can not detect Access Points.
Improved: CRID becomes disabled after a Standby/Resume.
Improved: Noise can be heard from Fujitsu HDDs after Standby, Hibernation, or Shut Down.
Added: Function control for PCs that support WiMax.
Improved: A CIR device appears in Device manager on computers without CIR.
Improved: When the PC is in Standby (Sleep), the computer does not resume when the battery capacity goes below 5%, and battery capacity drains to 0%.
Improved: A modem appears in Device manager on computers without Modems.
Improved: A TV Device appears when FN F5 is pressed on computers without TV-Out (S-Video).
Updated: Intel Micro Code.
Improved: Wake On LAN function can not disabled.
Improved: The computer does not resume from Standby mode when the USB Mouse or Keyboard is moved even though the USB Wakeup Function is enabled.
Version 1.40 - 2008-09-10Corrected: Noise that can be heard when a Fujitsu HDD is powered on.
Changed: Wake-up on LAN/Wireless LAN can be selected in Windows even though the setting is disabled in BIOS set up, to Wake-up on LAN/Wireless LAN is set to disabled in Windows when it is disabled in BIOS set up.
Corrected: Memory size is incorrect on computers configured with the Intel 945GM chipset.
Changed: Internal LCD is fixed/set to be Primary and External CRT is fixed/set to be Secondary in extended mode, to Internal LCD and External LCD can be selected as Primary or Secondary.
Corrected: WLK ((Windows Logo Kit) version 1.2 fails.
Corrected: The refresh rate for the LCD showed 58MHz, and now shows 60MHz.
Disabled: Intel Top Swap supported by Intel Chip Set ICH9.
Updated the HDCP (HD Copy Protection) code.
Corrected: Western Digital HDD boot issue.
Corrected: The BIOS could be updated in battery mode in the previous version.
Corrected: Toshiba Management Console can not be installed.
Version 1.10 - 2008-07-14First production BIOS release for these models.

ACPI Flash BIOS version 3.80 for Sat/Sat Pro U405/M305 and Portege M800
Change HistoryVersion 3.80 - 2009-06-04Fixed: When a blank notepad window is opened and the volume wheel is turned, "c" characters may be automatically input.
Version 3.70 - 2009-04-10Improved: The wrong memory size is displayed in Vista.
Version 3.60 - 2009-03-31Updated: MRC to version 2.6.
Improved: Reboot issue.
Improved: Can't detect a Bluetooth device.
Improved: Disk recovery issue.
Version 3.30 - 2009-03-03Fixed: Numlock stays on even after rebooting. (Included external USB keyboard sync internal keyboard issue.)
Added support for the 65W AC adapter constant power function.
Updated kernel code to r1.106 (include MRC2.5).
Included EC 83h command for UMA platform.
Version 3.20 - 2009-01-13Improved: LCD panel flashes one time while booting on PCs that support LG panels.
Improved: When the customer sets the BIOS Password in BIOS Setup menu then shuts down the PC by pressing power button, the BIOS Password is not set. (BIOS PW should have been set)
Improved: The BIOS can not be updated by Winflash64.
Improved: Bluetooth Icon appears when FN F8 is pressed on PCs that do not support Bluetooth.
Improved: Bluetooth Icon appears when FN F8 is pressed on PCs that do not support Bluetooth.
Improved: Pass rate of the Treboot test.
Updated: Intel Kernel Code r1.100.
Improved: BIOS Password issue.
Improved: Windows XP Intel Wireless LAN can not detect Access Points.
Improved: CRID becomes disabled after a Standby/Resume.
Improved: Noise can be heard from Fujitsu HDDs after Standby, Hibernation, or Shut Down.
Added: Function control for PCs that support WiMax.
Improved: A CIR device appears in Device manager on computers without CIR.
Improved: When the PC is in Standby (Sleep), the computer does not resume when the battery capacity goes below 5%, and battery capacity drains to 0%.
Improved: A modem appears in Device manager on computers without Modems.
Improved: A TV Device appears when FN F5 is pressed on computers without TV-Out (S-Video).
Updated: Intel Micro Code.
Improved: Wake On LAN function can not disabled.
Improved: The computer does not resume from Standby mode when the USB Mouse or Keyboard is moved even though the USB Wakeup Function is enabled.
Version 1.40 - 2008-09-10Corrected: Noise that can be heard when a Fujitsu HDD is powered on.
Changed: Wake-up on LAN/Wireless LAN can be selected in Windows even though the setting is disabled in BIOS set up, to Wake-up on LAN/Wireless LAN is set to disabled in Windows when it is disabled in BIOS set up.
Corrected: Memory size is incorrect on computers configured with the Intel 945GM chipset.
Changed: Internal LCD is fixed/set to be Primary and External CRT is fixed/set to be Secondary in extended mode, to Internal LCD and External LCD can be selected as Primary or Secondary.
Corrected: WLK ((Windows Logo Kit) version 1.2 fails.
Corrected: The refresh rate for the LCD showed 58MHz, and now shows 60MHz.
Disabled: Intel Top Swap supported by Intel Chip Set ICH9.
Updated the HDCP (HD Copy Protection) code.
Corrected: Western Digital HDD boot issue.
Corrected: The BIOS could be updated in battery mode in the previous version.
Corrected: Toshiba Management Console can not be installed.
Version 1.10 - 2008-07-14First production BIOS release for these models.

ACPI Flash BIOS version 4.80 for Sat/Sat Pro U405/M305 and Portege M800
Change HistoryVersion 4.80 - 2009-09-29Improved: Supervisor password issue - The computer asks for Supervisor password after clearing a User password. The computer should not ask for a Supervisor password if only the Supervisor password is set.
Improved: Illumination LEDs are on even when disabled in Setup.
Version 4.00 - 2009-07-31Improved: Winflash works in Battery (non-AC) mode.
Improved: WOL cannot wake from S5 on XP.
Added: Check the AC status for x64-bit the Windows flash command.
Version 3.90 - 2009-06-15Improved: The Illumination LEDs are turned off when the LCD is turned off for Energy Star 5.0.
Version 3.80 - 2009-06-04Fixed: When a blank notepad window is opened and the volume wheel is turned, "c" characters may be automatically input.
Version 3.70 - 2009-04-10Improved: The wrong memory size is displayed in Vista.
Version 3.60 - 2009-03-31Updated: MRC to version 2.6.
Improved: Reboot issue.
Improved: Can't detect a Bluetooth device.
Improved: Disk recovery issue.
Version 3.30 - 2009-03-03Fixed: Numlock stays on even after rebooting. (Included external USB keyboard sync internal keyboard issue.)
Added support for the 65W AC adapter constant power function.
Updated kernel code to r1.106 (include MRC2.5).
Included EC 83h command for UMA platform.
Version 3.20 - 2009-01-13Improved: LCD panel flashes one time while booting on PCs that support LG panels.
Improved: When the customer sets the BIOS Password in BIOS Setup menu then shuts down the PC by pressing power button, the BIOS Password is not set. (BIOS PW should have been set)
Improved: The BIOS can not be updated by Winflash64.
Improved: Bluetooth Icon appears when FN F8 is pressed on PCs that do not support Bluetooth.
Improved: Bluetooth Icon appears when FN F8 is pressed on PCs that do not support Bluetooth.
Improved: Pass rate of the Treboot test.
Updated: Intel Kernel Code r1.100.
Improved: BIOS Password issue.
Improved: Windows XP Intel Wireless LAN can not detect Access Points.
Improved: CRID becomes disabled after a Standby/Resume.
Improved: Noise can be heard from Fujitsu HDDs after Standby, Hibernation, or Shut Down.
Added: Function control for PCs that support WiMax.
Improved: A CIR device appears in Device manager on computers without CIR.
Improved: When the PC is in Standby (Sleep), the computer does not resume when the battery capacity goes below 5%, and battery capacity drains to 0%.
Improved: A modem appears in Device manager on computers without Modems.
Improved: A TV Device appears when FN F5 is pressed on computers without TV-Out (S-Video).
Updated: Intel Micro Code.
Improved: Wake On LAN function can not disabled.
Improved: The computer does not resume from Standby mode when the USB Mouse or Keyboard is moved even though the USB Wakeup Function is enabled.
Version 1.40 - 2008-09-10Corrected: Noise that can be heard when a Fujitsu HDD is powered on.
Changed: Wake-up on LAN/Wireless LAN can be selected in Windows even though the setting is disabled in BIOS set up, to Wake-up on LAN/Wireless LAN is set to disabled in Windows when it is disabled in BIOS set up.
Corrected: Memory size is incorrect on computers configured with the Intel 945GM chipset.
Changed: Internal LCD is fixed/set to be Primary and External CRT is fixed/set to be Secondary in extended mode, to Internal LCD and External LCD can be selected as Primary or Secondary.
Corrected: WLK ((Windows Logo Kit) version 1.2 fails.
Corrected: The refresh rate for the LCD showed 58MHz, and now shows 60MHz.
Disabled: Intel Top Swap supported by Intel Chip Set ICH9.
Updated the HDCP (HD Copy Protection) code.
Corrected: Western Digital HDD boot issue.
Corrected: The BIOS could be updated in battery mode in the previous version.
Corrected: Toshiba Management Console can not be installed.
Version 1.10 - 2008-07-14First production BIOS release for these models.

ACPI Flash BIOS version 5.00 for Sat/Sat Pro U405/M305 and Portege M800
Release NotesAfter the update completes, the computer will automatically shut down or restart.
Power on the computer if it is off.
While the "Toshiba" LOGO is displayed, press the F2 function key to start BIOS Setup.
Check the version of BIOS and press the F9 function key to load setup defaults.
Press the F10 function key to save settings and exit. The computer will automatically reboot.
Change HistoryVersion 5.00 - 2010-10-26Fixed: S4 resume issues.
Fixed: Wake on WLAN issues.
Added: SLP2.1.
Version 4.80 - 2009-09-29Improved: Supervisor password issue - The computer asks for Supervisor password after clearing a User password. The computer should not ask for a Supervisor password if only the Supervisor password is set.
Improved: Illumination LEDs are on even when disabled in Setup.
Version 4.00 - 2009-07-31Improved: Winflash works in Battery (non-AC) mode.
Improved: WOL cannot wake from S5 on XP.
Added: Check the AC status for x64-bit the Windows flash command.
Version 3.90 - 2009-06-15Improved: The Illumination LEDs are turned off when the LCD is turned off for Energy Star 5.0.
Version 3.80 - 2009-06-04Fixed: When a blank notepad window is opened and the volume wheel is turned, "c" characters may be automatically input.
Version 3.70 - 2009-04-10Improved: The wrong memory size is displayed in Vista.
Version 3.60 - 2009-03-31Updated: MRC to version 2.6.
Improved: Reboot issue.
Improved: Can't detect a Bluetooth device.
Improved: Disk recovery issue.
Version 3.30 - 2009-03-03Fixed: Numlock stays on even after rebooting. (Included external USB keyboard sync internal keyboard issue.)
Added support for the 65W AC adapter constant power function.
Updated kernel code to r1.106 (include MRC2.5).
Included EC 83h command for UMA platform.
Version 3.20 - 2009-01-13Improved: LCD panel flashes one time while booting on PCs that support LG panels.
Improved: When the customer sets the BIOS Password in BIOS Setup menu then shuts down the PC by pressing power button, the BIOS Password is not set. (BIOS PW should have been set)
Improved: The BIOS can not be updated by Winflash64.
Improved: Bluetooth Icon appears when FN F8 is pressed on PCs that do not support Bluetooth.
Improved: Bluetooth Icon appears when FN F8 is pressed on PCs that do not support Bluetooth.
Improved: Pass rate of the Treboot test.
Updated: Intel Kernel Code r1.100.
Improved: BIOS Password issue.
Improved: Windows XP Intel Wireless LAN can not detect Access Points.
Improved: CRID becomes disabled after a Standby/Resume.
Improved: Noise can be heard from Fujitsu HDDs after Standby, Hibernation, or Shut Down.
Added: Function control for PCs that support WiMax.
Improved: A CIR device appears in Device manager on computers without CIR.
Improved: When the PC is in Standby (Sleep), the computer does not resume when the battery capacity goes below 5%, and battery capacity drains to 0%.
Improved: A modem appears in Device manager on computers without Modems.
Improved: A TV Device appears when FN F5 is pressed on computers without TV-Out (S-Video).
Updated: Intel Micro Code.
Improved: Wake On LAN function can not disabled.
Improved: The computer does not resume from Standby mode when the USB Mouse or Keyboard is moved even though the USB Wakeup Function is enabled.
Version 1.40 - 2008-09-10Corrected: Noise that can be heard when a Fujitsu HDD is powered on.
Changed: Wake-up on LAN/Wireless LAN can be selected in Windows even though the setting is disabled in BIOS set up, to Wake-up on LAN/Wireless LAN is set to disabled in Windows when it is disabled in BIOS set up.
Corrected: Memory size is incorrect on computers configured with the Intel 945GM chipset.
Changed: Internal LCD is fixed/set to be Primary and External CRT is fixed/set to be Secondary in extended mode, to Internal LCD and External LCD can be selected as Primary or Secondary.
Corrected: WLK ((Windows Logo Kit) version 1.2 fails.
Corrected: The refresh rate for the LCD showed 58MHz, and now shows 60MHz.
Disabled: Intel Top Swap supported by Intel Chip Set ICH9.
Updated the HDCP (HD Copy Protection) code.
Corrected: Western Digital HDD boot issue.
Corrected: The BIOS could be updated in battery mode in the previous version.
Corrected: Toshiba Management Console can not be installed.
Version 1.10 - 2008-07-14First production BIOS release for these models.

Toshiba Software Modem Driver

Registry patch for System Restore Toshiba Utility Issue This is a registry patch that corrects a problem where Toshiba Utilities such as Flash Cards, Zooming, and ECO Utilities, will not work after using the Windows 7 "Restore from System Image Backup" feature.
Install Instructions
Save the file to the Windows Desktop.
Save all work in progress and close open applications.
On the Windows Desktop, double-click the downloaded file to start the installation.
Click Start at the TOSHIBA Archive Extractor window.
Click Yes if a User Account Control window is displayed.
The program will complete quickly.
Restart the computer.
Toshiba Utilities will work normally again.

This application allows your computer to automatically search for TOSHIBA software updates or other alerts from TOSHIBA that are specific to your computer system and its programs. When enabled, this application periodically transmits to our servers a limited amount of system information required to perform these updates or alerts. This feature is enabled by default.

Changes in this update

1. This update fixes Security Vulnerabilities discussed in Toshiba Service Station Security Update.
   

   Installation Instructions

   1. Download and save this file to a convenient location such as the Windows Desktop.
   2. Save all work in progress and close open applications.
   3. Double-click the downloaded file TC00398200D.exe to start the installation.
   4. Press the Start button at the Toshiba Archive Extractor window.
   5. Press Yes if a User Account Control message is displayed.
   6. If Toshiba Service Station 2.1.14 is applied successfully, the message below will be shown.

This is a Bluetooth Stack for Windows by Toshiba update

Changes in this update

1. This update fixes Security Vulnerabilities discussed in Toshiba Bluetooth Stack Security Update.
   

   Installation Instructions

   1. Download and save this file to a convenient location such as the Windows Desktop.
   2. Save all work in progress and close open applications.
   3. Double-click the downloaded file TC00636200a.exe to start the installation.
   4. Press the Start button at the Toshiba Archive Extractor window.
   5. Press Yes if a User Account Control message is displayed.
   6. If Bluetooth Stack for Windows by Toshiba v9.10.32(T) is applied successfully, the message below will be shown. Click Yes to restart the system.

Toshiba Service Station This application enables your computer to periodically search for Toshiba Software updates or alerts from Toshiba that are specific to your laptop.
Change points:
Fixed: System crashes after login.
Improved package downloads by using the Binary Intelligent Transfer Service (BITS).
Combined the Download and Install buttons.
Added a Home Link to the Settings Page.
Removed the Notification Level Setting.
Deletes obsolete software - i.e. Software that was already downloaded and installed.
Notification message improvements.
Installation Instructions
Save this file to a convenient location such as the Windows Desktop
Save all work in progress and close open applications.
On the Windows Desktop, double-click the downloaded file to start the installation.
Answer the displayed prompts to complete the installation.

Toshiba Skins

Toshiba Skins

Toshiba Software Installer

Toshiba Upgrade Assistant

Toshiba Assist (64bit) Toshiba Assist provides easy access to Setup, Support and Help, using the Toshiba Assist button or icon.

Bluetooth Monitor

Toshiba ConfigFree Utility

Toshiba Config Free

ConfigFree

ConfigFree

Toshiba Disc Creator

Toshiba Disc Creator

Toshiba Face Recognition

Toshiba Face Recognition

Toshiba Face Recognition

Toshiba Face Recognition

Toshiba Fingerprint Utility

Toshiba Fingerprint Utility

TrueSuite Access Manager

Toshiba Fingerprint Utility

Toshiba FM Tuner Utility

Toshiba FM Tuner Utility

Toshiba HDD Protection

Toshiba HDD Protection

Toshiba HDD Protection

HDMI Control Manager

HDMI Control Manager

HDMI Control Manager

Toshiba Hotkey Utility

Toshiba Hardware Setup Utility

Toshiba HW Setup Utility

Toshiba HW Setup Utility

Toshiba Hardware Setup Utility

Toshiba Extended Tiles

Toshiba Extended Tiles

Conexant Modem Region Select Utility

CD/DVD Drive Acoustic Silencer

CD/DVD Drive Acoustic Silencer

Conexant Modem Region Select Utility

Toshiba Remote Control Manager

Toshiba SD Memory Utilities

Toshiba Service Station Portege A600-NOWEBCAM, A600-ST2232, A600-ST2231, A600-ST2230, A600-SP2801C, A600-S2201, A600-S2202, A600-SP2801A, A600-SP2801R, A605-P201, A605-P200

Toshiba Software Upgrades

Toshiba Speech System

Toshiba Supervisor Password Utility

Toshiba Supervisor Password Utility

Toshiba Supervisor Password Utility

Toshiba Supervisor Password Utility

Truesuite Access Manager uninstaller This is a Tool for uninstalling TAM(authentec fingerprint software Truesuite Access Manager)Please run this before installing the Windows 7 Toshiba Fingerprint Utility.

Toshiba Assist

Toshiba Assist

Toshiba Value Added Package

Toshiba Value Added Package

Toshiba Value Added Package

Toshiba Value Added Package (TVAP)

Toshiba Value Added Package (TVAP)

Toshiba Value Added Package

Toshiba Value Added Package

Toshiba Value Added Package (TVAP)

Toshiba Value Added Package

Toshiba Value Added Package

Toshiba Value Added Package

Atheros Client Utility

Intel Proset Utility

Intel Proset Utility

Intel Proset

Intel Proset

Toshiba WPS Library

Toshiba Spanish Modem Manual for V.92 internal modems
This document is applicable only to Toshiba portable PCs with internal V.92 modems.
Please refer to the detailed specifications for your Toshiba portable to determine if you have a V.92 modem