TOSHIBA SATELLITE L45D-C4202W

Data: maggio 29th, 2015

Per scaricare il driver per TOSHIBA SATELLITE L45D-C4202W, compatibile con Windows, Non-OS, Windows 10 (64), Windows 10, Windows 10 (32), Windows 8.1 (64), Windows 8.1 (32), Windows 8 (64), Windows 8 (32), Windows 7 (64), Other, premete sul pulsante "Download". Se avete bisogno di driver o firmware di un’altra versione, inviate una richiesta. Se avete delle domande su questo driver, contattateci utilizzando il modulo di contatto. Sempre su questa pagina, potrete anche discutere di dettagli riguardanti installazione, rimozione o aggiornamenti per questo driver.

Modello:
L45D-C4202W
Fabbricante:
Toshiba
Tipo de dispositivo:
Laptop e Netbook / Satellite
Licenza:
Gratis

Windows Non-OS

Windows

Tipo: Application
Versione: 2.6.16.0
Dimensione: 3.25 Mb
Sistema operativo: Windows 10 (64), Windows 10 (32), Windows 8.1 (64), Windows 8.1 (32), Windows 8 (64), Windows 8 (32)

SERVICE STATION

This application allows your computer to automatically search for TOSHIBA software updates or other alerts from TOSHIBA that are specific to your computer system and its programs. When enabled, this application periodically transmits to our servers a limited amount of system information required to perform these updates or alerts. This feature is enabled by default.

To open Service Station:

  1. Click the Start menu.
  2. Enter "Service Station" into the search field.
  3. Click "Service Station" in the search results.
  4. Service Station will open.

 

To enable / disable Service Station:

  1. Click the "View Program Access Information" link located under "Last Update" in the lower Left corner.
  2. Toshiba Service Station Access Information window will open.
  3. To disable this application (not recommended) click the disable button. To continue using this application click the enable button.
Tipo: Pilote
Versione: 1.00.0049
Dimensione: 14.25 Mb
Sistema operativo: Windows 8.1 (64)
Install before other Toshiba Utilities.
Tipo: Application
Versione: 2.6.14
Dimensione: 4.71 Mb
Sistema operativo: Windows 10 (64), Windows 8.1 (32), Windows 8.1 (64), Windows 8 (64)

SERVICE STATION

This application allows your computer to automatically search for TOSHIBA software updates or other alerts from TOSHIBA that are specific to your computer system and its programs. When enabled, this application periodically transmits to our servers a limited amount of system information required to perform these updates or alerts. This feature is enabled by default.

To open Service Station:

  1. Click the Start menu.
  2. Enter "Service Station" into the search field.
  3. Click "Service Station" in the search results.
  4. Service Station will open.

 

To enable / disable Service Station:

  1. Click the "View Program Access Information" link located under "Last Update" in the lower Left corner.
  2. Toshiba Service Station Access Information window will open.
  3. To disable this application (not recommended) click the disable button. To continue using this application click the enable button.
Tipo: Application
Versione: 1.2.11.0
Dimensione: 42.4 Mb
Sistema operativo: Windows 8.1 (64)
Tipo: Application
Versione: 3.0.0.7
Dimensione: 4.4 Mb
Sistema operativo: Windows 8.1 (64)
This package has to be installed after Conexant audio driver is installed.
Tipo: Application
Versione: 2.0.18.3
Dimensione: 4.9 Mb
Sistema operativo: Windows 10 (64)
This package has to be installed after Conexant audio driver is installed.
Tipo: Application
Versione: 3.0.0.9
Dimensione: 4.42 Mb
Sistema operativo: Windows 10 (64)
This package has to be installed after Conexant audio driver is installed.
Tipo: Application
Versione: 1.00.02
Dimensione: 4.51 Mb
Sistema operativo: Windows 8.1 (32), Windows 8.1 (64), Windows 8 (64), Windows 7 (64)
This application will download the latest User's Guide for your computer from the Toshiba Support Web Site.

Requires internet connection and Adobe Reader.
Tipo: Application
Versione: 1.0.3
Dimensione: 2.14 Mb
Sistema operativo: Windows 10 (64), Windows 8.1 (64), Windows 8 (64), Windows 7 (64)
Install before "TOSHIBA eco Utility" in order to disable Peak Shift function.
Tipo: Application
Versione: 1.00.00
Dimensione: 4.19 Mb
Sistema operativo: Windows 8.1 (32), Windows 8.1 (64), Windows 8 (64), Windows 7 (64)
Tipo: Application
Versione: 1.00.01
Dimensione: 2.14 Mb
Sistema operativo: Windows 10 (64), Windows 8.1 (32), Windows 8.1 (64), Windows 8 (64), Windows 7 (64)
Tipo: Utilitaire
Versione: v2.0.3092
Dimensione: 39.3 Mb
Sistema operativo: Windows 10 (64)
Tipo: Application
Versione: V1.03.08.0002
Dimensione: 13.78 Mb
Sistema operativo: Windows 10 (64), Windows 8 (64)
Tipo: Application
Versione: 1.1.11.0
Dimensione: 39.38 Mb
Sistema operativo: Windows 8.1 (64)
Tipo: Application
Versione: 3.2.03.7001
Dimensione: 17.56 Mb
Sistema operativo: Windows 8.1 (64)
Use this program to create recovery media.NOTE: The Recovery Media Creation program will only work if the recovery files are still intact on the computer's hard drive.If your computer's hard drive of solid state drive has been formatted or repartitioned, then it may not be possible to use this application to create the recovery media.
Tipo: Application
Versione: 2.0.9.32001
Dimensione: 12.7 Mb
Sistema operativo: Windows 8.1 (64)
Tipo: Application
Versione: 4.0.4.2
Dimensione: 60.02 Mb
Sistema operativo: Windows 10 (64), Windows 8.1 (64)
Tipo: Application
Versione: 2.5.7.0004
Dimensione: 50.21 Mb
Sistema operativo: Windows 8.1 (64)

ECO UTILITY

Some laptops are equipped with "eco mode". This mode slightly lowers performance of some devices to reduce electric power consumption. You can realize measurable power savings by using it continuously. TOSHIBA eco Utility helps you monitor your power savings by showing approximate real time power consumption. Furthermore, it shows approximate accumulated power consumption and approximate accumulated power savings when using eco mode daily, weekly, and monthly. The utility also shows the approximate accumulated CO2 emission and savings while using eco mode. You can  track power savings by using eco mode continuously.

eco Mode sets the conditions described below. If you deviate from these settings, e.g., if you turn up the monitor brightness or turn on the LED illumination (*1), it will no longer be eco mode.

eco power plan is used for eco Mode. It has the following settings by default. These settings are in addition to the standard Power saver plan settings of Windows.

On AC adaptor plugged in:

It changes the display brightness to Level-4, changes the dimmed display brightness to Level-1 (*4), turns off the LED illumination (*1) and the keyboard backlight (*2), changes the time before dim the monitor to 2 minute (*4), changes the time before the monitor turns off to 5 minutes, changes the time before the hard disk turns off to 5 minutes, and changes the time before the system enters sleep to 10 minutes.

On Battery:

It changes the display brightness to Level-3, changes the dimmed display brightness to Level-1 (*4), turns off the LED illumination (*1) and the keyboard backlight (*2), changes the time before dim the monitor to 1 minute (*4), changes the time before the monitor turns off to 3 minutes (2 minutes, if models with Windows 7 installed), changes the time before the hard disk drive turns off to 3 minutes, and changes the time before the system enters into sleep mode to 5 minutes."
If you change the power plan to "eco", your PC is on eco mode.

*1: Only on models that support LED illumination
*2: Only on models that support Keyboard backlight
*3: Only on models that include the eco Button
*4: Only on models with Windows7 installed

To open the TOSHIBA eco utility:

  1. Click the Start menu.
  2. Enter "eco" into the search field.
  3. Click "eco Utility" in the search results.
  4. Please read the information in the first box, select "Agee" and click "OK".
  5. The TOSHIBA eco Utility will open allowing you monitor power consumption and set preferences.
  6. To learn more about the TOSHIBA eco Utility, click "Help" at the bottom of the screen

CLICK HERE and Refer to your Owner's Manual for additional information on the TOSHIBA eco Utility.

Tipo: Pilote
Versione: 2.6.04.01
Dimensione: 24.57 Mb
Sistema operativo: Windows 10 (64)
Tipo: Pilote
Versione: 2.6.04.04
Dimensione: 24.73 Mb
Sistema operativo: Windows 10 (64)
Tipo: Application
Versione: V9.01.00.03
Dimensione: 20.78 Mb
Sistema operativo: Windows 10 (64)
It is recommended to install Toshiba System Driver first.
Tipo: Application
Versione: 1.1.15.4
Dimensione: 43.56 Mb
Sistema operativo: Windows 10 (64)
Tipo: Utilitaire
Versione: 4.02.00.6400
Dimensione: 22.06 Mb
Sistema operativo: Windows 10 (64)
Tipo: Application
Versione: 3.0.0.0006
Dimensione: 52.52 Mb
Sistema operativo: Windows 10 (64)
Tipo: Utilitaire
Versione: 2.0.12.32002
Dimensione: 13.28 Mb
Sistema operativo: Windows 10 (64)
Must install Toshiba System Driver before installing this package.
Tipo: Application
Versione: 3.0.0.6
Dimensione: 44.1 Mb
Sistema operativo: Windows 10 (64)
Tipo: Application
Versione: 1.01.0002
Dimensione: 18.63 Mb
Sistema operativo: Windows 10 (64)
This driver includes Bluetooth ACPI driver and TOSHIBA hotkey driver.
Tipo: Pilote
Versione: 2.00.0005
Dimensione: 11.79 Mb
Sistema operativo: Windows 10 (64)
Install before other Toshiba Utilities.
Tipo: Application
Versione: 2.0.0.22C
Dimensione: 13.46 Mb
Sistema operativo: Windows 8.1 (64)

PASSWORD UTILITY

This utility adds additional password security to your Toshiba computer. After registering a user password, you will be required to input it when booting the computer or starting the Password Utility. Refer to your Owner's Manual for complete details.

To open the Password Utility:

  1. Click the Start menu.
  2. Enter "Password" into the search field.
  3. Click "Password Utility" in the search results.
  4. The Password Utility will open allowing you to set, delete or change the password.

 

  • Set password will regsiter a user password with the computer.
  • Delete allows you to delete the regsitered user password.
  • Change allows you to change the regsitered user password.

When setting a password, you can apply it to the HDD. For information about this feature, click on "Learn More...".

Tipo: Pilote
Versione: 17.13.1.13.1.e64_wCAT
Dimensione: 17.01 Mb
Sistema operativo: Windows 8.1 (64)
Tipo: Pilote
Versione: 17.13.1.0.1.e64_wCAT
Dimensione: 99.02 Mb
Sistema operativo: Windows 8.1 (64)
Tipo: Application
Versione: 17.1.1440.02
Dimensione: 6.15 Mb
Sistema operativo: Windows 8.1 (64)
Tipo: Pilote
Versione: 2023.4.0115.2015
Dimensione: 92.52 Mb
Sistema operativo: Windows 8.1 (64)
Tipo: Application
Versione: 2.3.35.3
Dimensione: 82.76 Mb
Sistema operativo: Windows 8.1 (64)
Tipo: Application
Versione: 6.3.9600.29084
Dimensione: 10.72 Mb
Sistema operativo: Windows 8.1 (64)
Tipo: Application
Versione: 14.502.1005-150126a-180078C-Toshiba
Dimensione: 293.42 Mb
Sistema operativo: Windows 8.1 (64)
Tipo: Pilote
Versione: 11.8.35.3
Dimensione: 122.43 Mb
Sistema operativo: Windows 8.1 (64)
Tipo: Pilote
Versione: 18.1.53.1C
Dimensione: 168.01 Mb
Sistema operativo: Windows 8.1 (64)
Tipo: Pilote
Versione: 9.0.0.9906
Dimensione: 82.25 Mb
Sistema operativo: Windows 8.1 (64)
Tipo: Pilote
Versione: 6.0.1.7459
Dimensione: 198.96 Mb
Sistema operativo: Windows 8.1 (64)
Tipo: Pilote
Versione: 8.038.0115.2015
Dimensione: 8.02 Mb
Sistema operativo: Windows 8.1 (64)
Tipo: Utilità
Versione: 1.2.23.0
Dimensione: 9.19 Mb
Sistema operativo: Windows 8.1 (64)
Tipo: Pilote
Versione: 6.30.223.259_wCAT
Dimensione: 17.81 Mb
Sistema operativo: Windows 8.1 (64)
Tipo: Application
Versione: 12.0.0.9060
Dimensione: 9.54 Mb
Sistema operativo: Windows 8.1 (64)
Tipo: Application
Versione: 2.2.1.14
Dimensione: 11.22 Mb
Sistema operativo: Windows 8.1 (64)
Tipo: Application
Versione: 2.2.20.0
Dimensione: 11.22 Mb
Sistema operativo: Windows 10 (64)
Tipo: Utilità
Versione: 1.0
Dimensione: 3.33 Mb
Sistema operativo: Windows 8.1 (64)
Tipo: Application
Versione: 4.3.03
Dimensione: 16.14 Mb
Sistema operativo: Windows 10 (64)
Utility for using PC as A2DP, HFP and HID Bluetooth Device

***NOTE*** This software package is part of the pre-installed software for the applicable products.
Tipo: Application
Versione: 1.0.0.1
Dimensione: 4.14 Mb
Sistema operativo: Windows 10 (64), Windows 8.1 (64), Windows 7 (64)
Tipo: Application
Versione: 1.2.0.0
Dimensione: 3.57 Mb
Sistema operativo: Windows 10 (64)
Tipo: Application
Versione: 2.0.0.0
Dimensione: 3.58 Mb
Sistema operativo: Windows 10 (64)
Tipo: Utilitaire
Versione: 1.00.00.0002
Dimensione: 2.14 Mb
Sistema operativo: Windows 10 (64)
Tipo: Application
Versione: 3.0.1.0003
Dimensione: 52.52 Mb
Sistema operativo: Windows 10 (64)

ECO UTILITY

Some laptops are equipped with "eco mode". This mode slightly lowers performance of some devices to reduce electric power consumption. You can realize measurable power savings by using it continuously. TOSHIBA eco Utility helps you monitor your power savings by showing approximate real time power consumption. Furthermore, it shows approximate accumulated power consumption and approximate accumulated power savings when using eco mode daily, weekly, and monthly. The utility also shows the approximate accumulated CO2 emission and savings while using eco mode. You can  track power savings by using eco mode continuously.

eco Mode sets the conditions described below. If you deviate from these settings, e.g., if you turn up the monitor brightness or turn on the LED illumination (*1), it will no longer be eco mode.

eco power plan is used for eco Mode. It has the following settings by default. These settings are in addition to the standard Power saver plan settings of Windows.

On AC adaptor plugged in:

It changes the display brightness to Level-4, changes the dimmed display brightness to Level-1 (*4), turns off the LED illumination (*1) and the keyboard backlight (*2), changes the time before dim the monitor to 2 minute (*4), changes the time before the monitor turns off to 5 minutes, changes the time before the hard disk turns off to 5 minutes, and changes the time before the system enters sleep to 10 minutes.

On Battery:

It changes the display brightness to Level-3, changes the dimmed display brightness to Level-1 (*4), turns off the LED illumination (*1) and the keyboard backlight (*2), changes the time before dim the monitor to 1 minute (*4), changes the time before the monitor turns off to 3 minutes (2 minutes, if models with Windows 7 installed), changes the time before the hard disk drive turns off to 3 minutes, and changes the time before the system enters into sleep mode to 5 minutes."
If you change the power plan to "eco", your PC is on eco mode.

*1: Only on models that support LED illumination
*2: Only on models that support Keyboard backlight
*3: Only on models that include the eco Button
*4: Only on models with Windows7 installed

To open the TOSHIBA eco utility:

  1. Click the Start menu.
  2. Enter "eco" into the search field.
  3. Click "eco Utility" in the search results.
  4. Please read the information in the first box, select "Agee" and click "OK".
  5. The TOSHIBA eco Utility will open allowing you monitor power consumption and set preferences.
  6. To learn more about the TOSHIBA eco Utility, click "Help" at the bottom of the screen

CLICK HERE and Refer to your Owner's Manual for additional information on the TOSHIBA eco Utility.

Tipo: Utilitaire
Versione: 3.0.6.1
Dimensione: 44.28 Mb
Sistema operativo: Windows 10 (64)
TOSHIBA System Settings is a desktop utility for configuring your computer.
Tipo: Application
Versione: 2.51.10.3
Dimensione: 10.13 Mb
Sistema operativo: Windows 10 (64)

FLASH CARDS

TOSHIBA Flash Cards is a utility using a card type design. It replaces the "Hot Key Utility" which is a conventional utility for Windows. Pressing a specific key together with the Fn key executes the function assigned to the key (hot key function). When a hot key is pressed or the mouse cursor is moved to the end of the screen, the cards are displayed in a row at the end of the screen.

When a key to which a hot key was assigned is pressed or when one of the cards lined up at the end of the screen is selected, the card is displayed. The functions that the user can select from this card are presented with the subitems displayed with the card. When the user selects a subitem, the function of the selected item is executed. A hot key or mouse can be used to select an item when it is displayed.

Selecting an item using the keyboard

While pressing down the Fn key, press the hot key repeatedly to move along the subitems that can be selected. The function of the subitem that is selected when the user releases the Fn key is executed.

  • When [F6/F7] is pressed, only selecting a subitem without releasing the Fn key executes the corresponding function.

Selecting an item with the mouse

Moving the mouse cursor can move along the subitems that can be selected. The function of the subitem that is selected when the left mouse button is clicked.

  • When [F6/F7] is pressed, moving the slider executes the function.

To open the Flash Cards utility settings:

  1. Click the Start menu.
  2. Enter "Flash" into the search field.
  3. Click "Flash Cards" in the search results.
  4. Setting for Flash Cards will open.
  5. Make changes as desired and click "apply" to set or "Cancel" to exit without changing settings.
Tipo: Pilote
Versione: 10.0.0.318.s64_wCAT_wINF
Dimensione: 48.11 Mb
Sistema operativo: Windows 10 (64)
Tipo: Application
Versione: 10.0.1.0
Dimensione: 9.94 Mb
Sistema operativo: Windows 10 (64)
Tipo: Application
Versione: 6.3.9600.29089
Dimensione: 14.59 Mb
Sistema operativo: Windows 10 (64)
Tipo: Application
Versione: 10.0.10130.29089
Dimensione: 14.59 Mb
Sistema operativo: Windows 10 (64)
Tipo: Pilote
Versione: 6.0.1.7548
Dimensione: 222.16 Mb
Sistema operativo: Windows 10 (64)
Tipo: Pilote
Versione: 6.0.1.7592
Dimensione: 231.72 Mb
Sistema operativo: Windows 10 (64)
Tipo: Pilote
Versione: 19.0.10.0
Dimensione: 168.06 Mb
Sistema operativo: Windows 10 (64)
Tipo: Pilote
Versione: 19.0.14.31
Dimensione: 171.29 Mb
Sistema operativo: Windows 10 (64)
Tipo: Pilote
Versione: 15.8.2.2
Dimensione: 119.54 Mb
Sistema operativo: Windows 10 (64)
Tipo: Pilote
Versione: 15.8.3.2
Dimensione: 118.41 Mb
Sistema operativo: Windows 10 (64)
Tipo: Pilote
Versione: 15.8.5.2
Dimensione: 121.33 Mb
Sistema operativo: Windows 10
Tipo: Pilote
Versione: 15.8.8.2
Dimensione: 121.36 Mb
Sistema operativo: Windows 10
Tipo: Application
Versione: 2.0.0.26
Dimensione: 13.46 Mb
Sistema operativo: Windows 10 (64)

PASSWORD UTILITY

This utility adds additional password security to your Toshiba computer. After registering a user password, you will be required to input it when booting the computer or starting the Password Utility. Refer to your Owner's Manual for complete details.

To open the Password Utility:

  1. Click the Start menu.
  2. Enter "Password" into the search field.
  3. Click "Password Utility" in the search results.
  4. The Password Utility will open allowing you to set, delete or change the password.

 

  • Set password will regsiter a user password with the computer.
  • Delete allows you to delete the regsitered user password.
  • Change allows you to change the regsitered user password.

When setting a password, you can apply it to the HDD. For information about this feature, click on "Learn More...".

Tipo: Application
Versione: 15.20.1040-150608a-185302C-Toshiba
Dimensione: 181.41 Mb
Sistema operativo: Windows 10 (64)
Tipo: Application
Versione: 15.20.1055-150706a-186534C-Toshiba
Dimensione: 312.17 Mb
Sistema operativo: Windows 10 (64)
Tipo: Pilote
Versione: 7.35.268.0.s64_wCAT_wINF
Dimensione: 46.68 Mb
Sistema operativo: Windows 10 (64)
Tipo: Pilote
Versione: 7.35.295.2.s64_wCAT_wINF
Dimensione: 46.85 Mb
Sistema operativo: Windows 10 (64)
Tipo: Pilote
Versione: 10.001.505.2015
Dimensione: 14.67 Mb
Sistema operativo: Windows 10 (64)
Tipo: Application
Versione: 12.0.1.580
Dimensione: 11.54 Mb
Sistema operativo: Windows 10 (64)
Tipo: Application
Versione: 12.0.1.670
Dimensione: 11.88 Mb
Sistema operativo: Windows 10 (64)
Tipo: Application
Versione: 1.02.4100
Dimensione: 9.44 Mb
Sistema operativo: Windows 10 (64)
Tipo: Pilote
Versione: 2023.10.0415.2015
Dimensione: 93.53 Mb
Sistema operativo: Windows 10 (64)
Tipo: Application
Versione: V2.3.36.3
Dimensione: 87.55 Mb
Sistema operativo: Windows 10 (64)
Tipo: Application
Versione: 2.3.36.3
Dimensione: 87.55 Mb
Sistema operativo: Windows 10 (64)
Tipo: Pilote
Versione: 18.11.0.2.0.e64_woCAT
Dimensione: 107.14 Mb
Sistema operativo: Windows 10 (64)
Tipo: Pilote
Versione: 18.11.0.8.1.e64_wCAT
Dimensione: 109.64 Mb
Sistema operativo: Windows 10 (64)
Tipo: Application
Versione: 17.1.1524.1353
Dimensione: 6.27 Mb
Sistema operativo: Windows 10 (64)

Non-OS

Tipo: BIOS
Versione: 1.10
Dimensione: 13.64 Mb
Sistema operativo: Other
  • Release Notes

  • For CD-ROM BIOS updates in Windows 8 models: (1) Shut down the system while pressing the SHIFT key to completely power off. (2) Power on while pressing F2 to enter BIOS Setup. (3) From the Security tab set the "Secure Boot" setting to "Disabled". (4) From the Advanced tab, enter "System Configuration" then set the Boot Mode to "CSM Boot" if the setting is available. (5) Press F10 to save and exit. (6) Boot from the BIOS CD-ROM and type BIOS at the prompt. (7) After the BIOS update has completed, restore the BIOS settings that were changed.
  • Note: The BIOS Launcher "CD_ROM Installation" option may not automatically proceed to burn the CD-ROM in Windows 8. If this occurs navigate to the root directory of the C-Drive then open the directory named after the BIOS filename (ex. C:\\skgjv130), and manually burn the CD-ROM from the disc image (ISO) file.
  • For CD-ROM BIOS updates in Windows 7 models: Type BIOS then press enter at the C:\\ prompt.
  • For all updates: The BIOS update will force the computer to shut down or restart. Please make sure to save all work in progress before starting BIOS updates.
  • Power on the computer if it is off.
  • While the "TOSHIBA" logo is displayed, press the F2 function key to start BIOS Setup.
  • Check the version of BIOS and press the F9 function key then Enter to load setup defaults.
  • Press the F10 function key then Enter to save settings and exit. The computer will automatically reboot.

Change History

Version 1.10 - 2015-03-27
  • Initial production release for these models.
Tipo: BIOS
Versione: 5.00
Dimensione: 20.87 Mb
Sistema operativo: Other
  • Release Notes

  • For CD-ROM BIOS updates in Windows 8x or Windows 10 models: (1) Shut down the system while pressing the SHIFT key to completely power off. (2) Power on while pressing F2 to enter the BIOS Setup Menu. (3) From the Security tab and set the "Secure Boot" setting to "Disabled". (4) From the Advanced tab, enter "System Configuration" and set the Boot Mode to "CSM Boot" if the option is available. (5) Press F10 to save and exit. (6) Boot from the BIOS CD-ROM then type BIOS at the prompt. (7) After the BIOS update has completed, restore the BIOS settings that were changed.
  • For CD-ROM BIOS updates in Windows 7 models: Type BIOS then press enter at the prompt.
  • Note: The BIOS Launcher "CD_ROM Installation" option may not automatically proceed to burn the CD-ROM in Windows 8x or Windows 10. If this occurs navigate to the root directory of the C-Drive then open the directory named after the BIOS filename (ex. C:\\skgjv130), and manually burn the CD-ROM from the disc image (ISO) file.
  • For all updates: The BIOS update will force the computer to shut down or restart. Please make sure to save all work in progress before starting BIOS updates.
  • Power on the computer if it is off.
  • While the "TOSHIBA" logo is displayed, press the F2 function key to start BIOS Setup.
  • Check the version of BIOS and press the F9 function key then Enter to load setup defaults.
  • Press the F10 function key then Enter to save settings and exit. The computer will automatically reboot.

Change History

Version 5.00 - 2015-08-24
  • First release for Windows 10.
  • Implemented a change so BIOS enables the Trusted Platform Module (TPM) function when the BIOS receives the SCI 0x16B command to switch boot mode from CSM to UEFI mode.
  • Added the Windows Firmware Update function to support Embedded Controller (EC) ROM upgrades.
  • Fix Enter "HDD/SSD password" UI will occur twice when restart machine.
  • Fixed a system hang that occurred during startup while the Toshiba logo was displayed.
  • Made a change so the Windows Firmware Update version that is displayed will be the same as the BIOS version.
  • Fixed a Trusted Platform Module (TPM) HLK issue.
  • Modified to protect the PSP NVRAM area when flashing the BIOS.
  • Updated the Platform Initialization (PI) to 1.0.0.4.
  • Added the LG (LP140WH8-TPK1) LCD to the panel list.
  • Fixed an issue where some keys would not function with a Japanese keyboard.
Version 1.10 - 2015-03-27
  • Initial production release for these models.
Tipo: Application
Versione: 4.0.5.0
Dimensione: 60.48 Mb
Sistema operativo: Other
Tipo: Application
Versione: 1.00.02
Dimensione: 4.51 Mb
Sistema operativo: Windows 10 (64), Windows 8.1 (64), Other
The Toshiba User's Guide Application will download the appropriate User's Guide to your computer.

Requires an internet connection.

***NOTE*** This software package is part of the pre-installed software for the applicable products.


Più driver

TOSHIBA SATELLITE 4030CDT
Driver per Scheda grafica TOSHIBA SATELLITE 4030CDT (Other)

TOSHIBA SATELLITE L505-S5982
Driver per Laptop e Netbook TOSHIBA SATELLITE L505-S5982 (Windows 7, Windows Vista, Windows XP)

TOSHIBA SATELLITE L305-S5916
Driver per Laptop e Netbook TOSHIBA SATELLITE L305-S5916 (Windows 7, Windows Vista, Windows XP)

TOSHIBA SATELLITE L305-SP6980A
Driver per Laptop e Netbook TOSHIBA SATELLITE L305-SP6980A (Windows 7, Windows Vista, Windows XP)

TOSHIBA SATELLITE A500-ST5608
Driver per Laptop e Netbook TOSHIBA SATELLITE A500-ST5608 (Other)

TOSHIBA SATELLITE A305-SP6804R
Driver per Laptop e Netbook TOSHIBA SATELLITE A305-SP6804R (Other)


Richiedere il driver

ejemplo